User Manual

25
English
Recording Your Performance on the Internal Memory
Recording Your Performance
Chapter
4
6
Press the +/YES and –/NO buttons to select the
destination song number.
Note
• If you select an empty song (which contains no data), the song number and
the blank indication (- - -) appears alternately on the display.
• Note that the new recording will erase the existing data if you select a song
which contains data.
• To cancel recording, press the STOP or REC button.
7
Press the PLAY/PAUSE button.
Recording starts.
The REC and PLAY/PAUSE lamps light up and the time counter
(measures) on the display advances.
(Measures)
8
Begin playing.
Note
If the song being recorded exceeds the size limit (approximately 500
KB) during recording, “FUL” appears on the display and recording stops
automatically. Press either the STOP, +/YES or –/NO button to save the data.
9
Stop playing, and press the STOP or REC button.
Recording stops.
When recording is stopped, dashes appear on the display indicating
that recorded data is being saved.
If the data is successfully saved, “End” will appear on the display.
Then the song number will appear.
Caution
Do not turn the unit off while dashes appear on the display as this may corrupt
the data or damage the internal memory.
Note
• If the capacity of the memory has run out during recording, “FUL” appears
on the display and the data is not saved. Delete unnecessary files (page
31) and try again.
• If you stop recording without playing, the selected song will be deleted.
or