User Manual

26
Recording Your Performance
Chapter
4
Recording Your Performance on the USB Storage Device
You can record your performance directly on the USB storage device. Recorded performances are saved as a MIDI
song (SMF0) or an audio song (USB Audio Recorder, 44.1kHz/16bit stereo WAV).
Note
• You can record as much as the capacity of the USB storage device allows.
• You can record up to approximately 500 KB per one MIDI song recording and up to 80 minutes per one audio song recording.
• You can also use metronome when recording your performance (page 28).
1
Connect the USB storage device to the USB port at
the front of the control unit.
For details, see “Connecting the USB Storage Device” on page 36.
2
Press the FUNC. button repeatedly to switch the
function to SONG.
The song number of the currently selected category appears on the
display.
3
Hold the FUNC. button for a second to switch to
the song category selection display.
The currently selected song category blinks on the display.
Hold
4
Press the +/YES or –/NO button to select desired
category.
Song Category Explanation
USB MIDI
(user songs)
Select this to record your performance as a MIDI song
USB AUDIO
(user songs)
Select this to record your performance as an audio song
5
Press the FUNC. button to return to the song
selection display.
6
Press the REC button.
The REC lamp blinks and the unit turns into the recording standby
mode.
The smallest number of empty song (which contains no data) in the
selected song category is automatically selected.
Note
• If there is no empty song, “FUL” appears on the display.
• If the capacity of the USB storage device is running out, “EnP” appears
on the display. You can start recording, but the capacity may become full
during recording. We recommend you to delete unnecessary files first (page
31), to ensure sufficient capacity.