User Manual

30
Copying a Song File to the USB Storage Device
Handling Song Files
Chapter
5
7
Hold the REC button for 3 seconds.
“SAv” appears on the display.
Then the smallest number of empty song in the USB MIDI user song
category and the blank indication (- - -) appears alternately on the
display.
Note
• If there is no empty song in the USB MIDI user song category, “FUL”
appears on the display and the song cannot be copied. Delete unnecessary
files (page 31) and try again.
• You cannot copy demonstration songs or preset songs. If you try to copy
such songs, “E01” or “Pro” appears on the display.
Hold
8
Press the +/YES or –/NO buttons to select the
destination song number.
9
Press the FUNC. button.
“n-y” and “SAv” appears alternately on the display.
10
Press the +/YES button.
Copying starts.
Dashes appear on the display indicating that the selected song is
being copied.
If the song is successfully copied, “End” will appear on the display.
Caution
Do not turn the unit off or disconnect the USB storage device while dashes
appear on the display as this may corrupt the data or damage the internal
memory and/or the USB storage device.
Note
To cancel copying, press the –/NO or STOP button.