User Manual

TA3, TC3, SH3, SC3 MIDI Reference / MIDI-Referenz / Référence MIDI / Referencia MIDI
14
MIDI Data Format / MIDI-Datenformat / Format des données MIDI / Formato de datos MIDI
TOTAL SIZE 14
The second byte of the address is considered as an Insertion effect number.
n: insertion effect number
The Insertion Effect No. range is from 0 to 1. Values outside the range are handled as unknown and ignored.
For effect types that do not require MSB, the Parameters for Address 02-0B will be received and the Parameters for Address 30-42 will not be received.
For effect types that require MSB, the Parameters for Address 30-42 will be received and the Parameters for Address 02-0B will not be received.
When Bulk Dumps that include Effect Type data are transmitted, the Parameters for Address 02-0B will always be transmitted. But, effects that require MSB, when the bulk dump is received the Parameters for Address 02-0B will not
be received.
MIDI Parameter Change Table (MULTI PART)
TOTAL SIZE 29
40 2 00-7F
00-7F
INSERTION EFFECT PARAMETER 9 MSB
INSERTION EFFECT PARAMETER 9 LSB
Refer to Effect Type List
"
(Depends on Insertion Type)
42 2 00-7F
00-7F
INSERTION EFFECT PARAMETER 10 MSB
INSERTION EFFECT PARAMETER 10 LSB
"
"
(Depends on Insertion Type)
Address
(H)
Size
(H)
Data
(H)
Parameter Description
XG Default
(H)
MIDI
Reception
MIDI Transmission
Song Panel Song
08 nn 00 1 00-20 NOT USED
01 1 00-7F BANK SELECT MSB 0...127 part 10=7F, other parts=00
02 1 00-7F BANK SELECT LSB 0...127 00
03 1 00-7F PROGRAM NUMBER 1...128 00
04 1 00-0F,
7F
Rcv CHANNEL 1...16, OFF Part No.
05 1 00-01 MONO/POLY MODE MONO, POLY 01
06 1 00-02 SAME NOTE NUMBER KEY ON ASSIGN SINGLE, MULTI, INST (for Drum) 01
07 1 00-03 PART MODE NORMAL, DRUM, DRUMS1...2 part 10=02, other parts=00
(Voice)
08 1 28-58 NOTE SHIFT −24...0...+24 [semitones] 40
09 2 00-0F
00-0F
DETUNE −12.8...0...+12.7 [Hz]
1st bit 3-0 bit 7-4
2nd bit 3-0 bit 3-0
08 00
0B 1 00-7F VOLUME 0...127 64
0C 1 00-7F VELOCITY SENSE DEPTH 0...127 40
(Function)
0D 1 00-7F VELOCITY SENSE OFFSET 0...127 40
(Function)
0E 1 00-7F PAN RND, L63...C...R63 40
0F 1 00-7F NOTE LIMIT LOW C−2...G8 00
10 1 00-7F NOTE LIMIT HIGH C−2...G8 7F
11 1 00-7F DRY LEVEL 0...127 7F
12 1 00-7F CHORUS SEND 0...127 00
13 1 00-7F REVERB SEND 0...127 28
14 1 00-7F VARIATION SEND 0...127 00
15 1 00-7F VIBRATO RATE −64...0...+63 40
16 1 00-7F VIBRATO DEPTH −64...0...+63 40
17 1 00-7F VIBRATO DELAY −64...0...+63 40
18 1 00-7F FILTER CUTOFF FREQUENCY −64...0...+63 40
19 1 00-7F FILTER RESONANCE 64...0...+63 40
1A 1 00-7F EG ATTACK TIME −64...0...+63 40
1B 1 00-7F EG DECAY TIME −64...0...+63 40
1C 1 00-7F EG RELEASE TIME −64...0...+63 40
1D 1 28-58 MW PITCH CONTROL −24...0...+24 [semitones] 40
1E 1 00-7F MW LOW PASS FILTER CONTROL −9600...0...+9450 [cent] 40
1F 1 00-7F MW AMPLITUDE CONTROL −100...0...+100 [%] 40
20 1 00-7F MW LFO PMOD DEPTH 0...127 0A
21 1 00-7F MW LFO FMOD DEPTH 0...127 00
22 1 00-7F MW LFO AMOD DEPTH 0...127 00
23 1 28-58 BEND PITCH CONTROL −24...0...+24 [semitones] 42
24 1 00-7F BEND LOW PASS FILTER CONTROL −9600...0...+9450 [cent] 40
25 1 00-7F BEND AMPLITUDE CONTROL −100...0...+100 [%] 40
26 1 00-7F BEND LFO PMOD DEPTH 0...127 00
27 1 00-7F BEND LFO FMOD DEPTH 0...127 00
28 1 00-7F BEND LFO AMOD DEPTH 0...127 00
30 1 00-01 Rcv PITCH BEND OFF, ON 01
31 1 00-01 Rcv CH AFTER TOUCH (CAT) OFF, ON 01
32 1 00-01 Rcv PROGRAM CHANGE OFF, ON 01
33 1 00-01 Rcv CONTROL CHANGE OFF, ON 01
34 1 00-01 Rcv POLY AFTER TOUCH (PAT) OFF, ON 01
35 1 00-01 Rcv NOTE MESSAGE OFF, ON 01
36 1 00-01 Rcv RPN OFF, ON 01
37 1 00-01 Rcv NRPN OFF, ON XG mode=01, GM mode=00
38 1 00-01 Rcv MODULATION OFF, ON 01
39 1 00-01 Rcv VOLUME OFF, ON 01
3A 1 00-01 Rcv PAN OFF, ON 01
3B 1 00-01 Rcv EXPRESSION OFF, ON 01
3C 1 00-01 Rcv HOLD1 OFF, ON 01
3D 1 00-01 Rcv PORTAMENTO OFF, ON 01
3E 1 00-01 Rcv SOSTENUTO OFF, ON 01
3F 1 00-01 Rcv SOFT PEDAL OFF, ON 01
40 1 00-01 Rcv BANK SELECT OFF, ON 01
41 1 00-7F SCALE TUNING C −63...0...+63 [cent] 40
(Function)
42 1 00-7F SCALE TUNING C# −63...0...+63 [cent] 40
(Function)
43 1 00-7F SCALE TUNING D −63...0...+63 [cent] 40
(Function)
44 1 00-7F SCALE TUNING D# −63...0...+63 [cent] 40
(Function)
45 1 00-7F SCALE TUNING E 63...0...+63 [cent] 40
(Function)
46 1 00-7F SCALE TUNING F −63...0...+63 [cent] 40
(Function)
47 1 00-7F SCALE TUNING F# −63...0...+63 [cent] 40
(Function)