Silent Violin Owner's Manual

ManualsBrandsYamaha ManualsMusical InstrumentSilent Violin SV130S

Thank you for purchasing the Yamaha Silent Violin. In order to obtain the maxi-

mum performance and enjoyment from your Silent Violin, we urge you to read

this Owner’s Manual thoroughly before using the instrument. Please keep this

Owner’s Manual in a safe place for later reference.

Precautions.................................................................... 3

Main Body/Accessories ................................................ 4

Nomenclature ................................................................ 5

Setup .............................................................................. 7

■ Tuning ......................................................................................... 7

■ The Shoulder Rest ...................................................................... 8

■ The Bow (supplied with the SV130S) ......................................... 8

■ Changing Strings ........................................................................ 8

Power Supply ............................................................... 10

■ Using Batteries ......................................................................... 10

■ Supplying AC Power ................................................................. 10

Using the Controls ...................................................... 11

The Reverb................................................................... 11

Connecting External Devices..................................... 12

■ AUX IN jack .............................................................................. 13

■ LINE OUT jack .......................................................................... 13

Specifications .............................................................. 14

Congratulations!

SV130/SV130S

Owner’s Manual

Contents

English

02_sv130_e0.pm65 08.6.10, 10:37 AM1

Black

Summary of content (14 pages)

PAGE 1
English SV130/SV130S English Owner’s Manual Congratulations! Thank you for purchasing the Yamaha Silent Violin. In order to obtain the maximum performance and enjoyment from your Silent Violin, we urge you to read this Owner’s Manual thoroughly before using the instrument. Please keep this Owner’s Manual in a safe place for later reference. Contents Precautions .................................................................... 3 Main Body/Accessories ................................................
PAGE 2
SPECIAL MESSAGE SECTION This product utilizes batteries or an external power supply (adaptor). DO NOT connect this product to any power supply or adaptor other than one described in the manual, on the name plate, or specifically recommended by Yamaha. This product should be used only with the components supplied or; a cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is used, please observe all safety markings and instructions that accompany the accessory product.
PAGE 3
Your Silent Violin will give you years of reliable service if you follow the simple rules given below: ■ Location ■ Handling and Transport Do not expose it to the following conditions to avoid deformation, discoloration, or more serious damage. • Direct sunlight (e.g. near a window). • High temperatures (e.g. near a heat source, outside, or in a car during the daytime). • Excessive humidity. • Excessive dust. • Strong vibration. ■ Power Supply • Turn the power switch OFF when not in use.
PAGE 4
Main Body/Accessories After opening the packaging, please check that all the parts listed below are included. SV130 • Violin SV130 • SUM-3 (AA) size Manganese batteries x2 • Bridge * The supplied battery is for demonstration purposes. • Stereo earphones • Audio cable • Shoulder rest : KUN Yamaha Special SV130S The following items are in addition to the SV130 package. • Bow : 4/4 size • Hard case • Rosin : PIRASTRO Schwarz 9005 4 02_sv130_e0.pm65 4 Black 08.6.
PAGE 5
Nomenclature ● Front Tuning peg Nut Neck Fingerboard 4th string (G) 2nd string (A) 3rd string (D) 1st string (E) Body Bridge Frame Chin rest Bridge seat Adjuster Tailpiece 5 02_sv130_e0.pm65 5 Black 08.6.
PAGE 6
● Controls VOLUME REVERB switch POWER switch ROOM/HALL 1/HALL 2 REV. ON/ON/OFF Lamp DC-IN 9-12V jack (Power adaptor connector) Cord hook LINE OUT jack : Standard stereo phone type PHONES jack (Stereo earphones) : Stereo mini type AUX IN jack : Stereo mini type AUX VOL (AUX volume) 6 02_sv130_e0.pm65 6 Black 08.6.
PAGE 7
Setup ■ Tuning The Silent Violin is shipped from the factory with the bridge unfitted. First, set up the bridge and then proceed with tuning. • The lower side of the bridge supports the 1st string (E), the higher side supports the 4th string (G). Make sure the bridge is placed properly, then set the bridge in the bridge seat. The side of the bridge with the AUBERT logo should face the tailpiece. • Ensure that the bridge stands vertically. If it leans to one side, use both hands to adjust.
PAGE 8
■ The Shoulder Rest Shoulder rest The shoulder rest accessory is supplied to give you added support when holding the violin between your shoulder and chin. Refer to the illustration and insert the shoulder rest into the holes provided (on the rear of the instrument) to suit your playing position. Pins • If the instrument can be held comfortably without the shoulder rest, the use of the rest won’t be necessary. • The pins on the shoulder rest slightly point outward.
PAGE 9
2 3 Place the ball (on the end of the string) in the notch on the adjuster. Make sure the ball is properly inserted in the adjuster’s notch. Adjuster’s notch Ball Insert the other end of the string into the hole on the tuning peg. Ensure that the string is wound on the right side of the hole for the 1st (E) and 2nd (A) strings, and on the left side of the hole for the 3rd (D) and 4th (G) strings. Next, check the bridge does not fall over as you wind the strings.
PAGE 10
Power Supply The Silent Violin can be operated with either battery or AC power. Always turn the power switch (OFF/ON/REV.ON) on the rear panel OFF before making AC power connections or replacing batteries. ■ Using Batteries 1 Open the battery compartment situated on the back of the Silent Violin. 2 Insert the two batteries supplied (SUM-3 (AA) size). Take careful note of the polarity markings as shown in the illustration above, and insert the batteries. 3 Replace the battery compartment cover.
PAGE 11
Using the Controls 1 Slide the POWER switch, located on the rear of the instrument, to its ON position. The lamp will light green. 2 Connect the stereo earphones to the PHONES jack on the side of the instrument, make sure that the L & R side earphones are used in the correct ears. 3 Rotate the VOLUME dial to the desired playing level. Lights green • Do not operate at high volume levels when using earphones. Doing so can lead to irreparable damage to your hearing.
PAGE 12
Connecting External Devices Silent Violin SUM-3 (AA) size battery x2 • Using the cord hook Wrap the power adaptor’s cord around the cord hook (prevents cord from being unplugged). or Power Adaptor (Option) Cord hook Electric Outlet DC-IN 9-12V LINE OUT Stereo Earphones PHONES AUX IN Powered Speaker MD Player CD Player Electronic Tuner P.A. Mixer, Recording Mixer Cassette Player Electronic Metronome 3 12 02_sv130_e0.pm65 12 Black 08.6.
PAGE 13
■ AUX IN jack ■ LINE OUT jack • The AUX IN jack, located on the side of the instrument, can be used to connect an external stereo signal source to the Silent Violin. Connecting the audio output of a CD player, cassette player, etc. to the instrument allows you to play along with the external audio source. • The LINE OUT jack, located on the side panel, delivers the stereo signal of the Silent Violin to external audio equipment.
PAGE 14
Specifications Neck Maple Body Spruce Fingerboard Ebony Tuning Pegs Ebony and resin hybrid type Bridge Maple (Aubert) Frame/Chin Rest/Tailpiece ABS Resin Adjuster 4 pieces (Wittner) Strings Ball-end type Sensor Piezo pick-up (underneath the bridge) Connectors/Controls • Headphone Output • AUX IN (w/Volume Control) • LINE OUT • Volume • Reverb Switch (ROOM/HALL 1/HALL 2) • POWER Switch (OFF/ON/REV.