User Manual

13
■
Using the stereo earphones
(or stereo output to an external device)
When using the instrument with the supplied stereo earphones or a separately purchased pair of
headphones, or when you want to send the instrument’s stereo output to an external device, use
the headphones (PHONES) jack for connecting the earphones or external device.
1.
Set the headphones ON/OFF switch, located on the right side of the control panel, to its “ON” position
to supply power to the Silent Guitar. The power lamp will light.
• When using the LINE OUT jack, audio output is delivered to the headphones jack regardless of the
headphones ON/OFF switch position.
2.
Insert the earphone plug into the headphone jack. When connecting the instrument to an external de-
vice, connect the external device to the PHONES jack using a cable with a stereo plug.
3.
The remaining procedures are the same as described above in the “Using the LINE OUT jack” sec-
tion’s steps 2 through 4.
• When using a pair of headphones, do not operate at high volume levels for long periods of time.
Doing so can lead to irreparable damage to your hearing.
• Do not disconnect or connect the plug when the headphones are placed over your ears.
Using the Controls
02_slg110s_en.indd 13 10/10/20 21:44