Owner's Manual

13
When putting the Silent Guitar into the supplied soft case, remove the left frame
from the Silent Guitar, and then place in the individual parts in the case as shown
in the illustration below.
Placing the instrument in the soft case does not guarantee against any dam-
ages to individual parts.
The soft case is designed for storing and transporting the instrument, and protecting it from dust, etc. Do
not position the instrument with its bridge side facing down in the case, and do not cause any damage to
the instrument by placing any objects on top of the case, hitting it, etc.
Power adaptor
Left frame
Using the Soft Case
Silent Guitar
main body
Using the Controls
/
Using the Soft Case
• Put the left frame into the case’s
larger pocket.
• Put the power adaptor into the
smaller pocket in the case and
secure the cover using the Vel-
cro® tape.
• When laying the case down
with the instrument packed in-
side, make sure that the case is
placed with the guitar’s bridge
side facing up.
2.
Insert the earphone plug into the headphone jack. When connecting the instrument to an external de-
vice, connect the external device to the PHONES jack using a cable with a stereo plug.
3.
The remaining procedures are the same as described above in the “Using the LINE OUT jack” sec-
tion’s steps 2 through 4.
• When using a pair of headphones, do not operate at high volume levels for long periods of time. Do-
ing so can lead to irreparable damage to your hearing.
• Do not disconnect or connect the plug when the headphones are placed over your ears.
02_slg110n_en.indd 13 10/10/20 20:53