Manuale di istruzioni IT
Explanation of Graphical Symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/ or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
PRECAUZIONI LEGGERE ATTENTAMENTE PRIMA DI CONTINUARE * Conservare questo manuale in un luogo sicuro per future consultazioni. AVVERTENZA Attenersi sempre alle precauzioni di base indicate di seguito per evitare il rischio di lesioni gravi o addirittura di morte conseguente a scosse elettriche, cortocircuiti, danni, incendi o altri pericoli.
Collegamenti Batteria di backup • Prima di collegare il dispositivo ad altre apparecchiature, spegnere tutti i dispositivi interessati. Prima di accendere o spegnere i dispositivi, impostare al minimo i livelli del volume. Precauzioni di utilizzo • Non utilizzare il dispositivo per lunghi periodi di tempo o con livelli di volume eccessivi. Tali pratiche potrebbero causare una perdita permanente dell'udito. In caso di perdita dell'udito o se si percepiscono fischi nelle orecchie, consultare un medico.
Introduzione Sommario Introduzione all'unità SP2060 Introduzione....................................... 7 LIMITER...................................................................... 30 SCENE ......................................................................... 30 Accessori (accertarsi che i seguenti oggetti siano contenuti nella confezione.) ............................................................ 7 Informazioni sulla versione firmware ...............................
Vi ringraziamo per aver acquistato il processore per altoparlanti SP2060 Yamaha. Per sfruttare appieno le caratteristiche e le prestazioni offerte dall'unità SP2060, raccomandiamo di leggere attentamente questo manuale di istruzioni prima di collegare o di usare l'unità. Conservare questo manuale in un luogo sicuro per future consultazioni. È possibile controllare la versione firmware dell'unità SP2060 nella schermata UTILITY (vedere a pagina 29).
Introduzione Precauzioni per l'uso di un'unità SP2060 montata in rack Introduzione all'unità SP2060 Controlli e connettori Se si installano più unità SP2060 (oppure un'unità SP2060 e altri dispositivi) in un rack che dispone di una ventilazione insufficiente, il calore generato da ciascuna unità potrebbe far aumentare la temperatura all'interno del rack e ridurre le prestazioni dell'unità SP2060. Quando si installano le unità SP2060 in un rack, lasciare un vano del rack vuoto ogni due unità.
Caratteristiche Il processore per altoparlanti SP2060 Yamaha sfrutta la più avanzata tecnologia digitale e supporta segnali audio fino a 96 kHz. L'unità SP2060 è dotata di due connettori analogici per canali in ingresso, un connettore AES/EBU e sei connettori analogici per canali in uscita. Poiché è dotata di impostazioni preimpostate per altoparlanti per sistemi fissi come quelli della serie IF/IS Yamaha, l'unità SP2060 consente di sfruttare al meglio la vasta gamma di altoparlanti da 1 a 6 vie.
Introduzione all'unità SP2060 Introduzione Configurazione Introduzione all'unità SP2060 L'unità SP2060 dispone di 12 configurazioni. Selezionarne una che si adatti alla combinazione e alla configurazione degli altoparlanti collegati. Una configurazione viene memorizzata come parte di ciascuna scena preset (scena di sola lettura) negli slot dall'1 al 12 della memoria scene e può essere richiamata insieme alla scena corrispondente.
Introduzione Introduzione all'unità SP2060 2 x (2-way + Sub) Controlla due altoparlanti a 2 vie e subwoofer.
Introduzione all'unità SP2060 Introduzione 2 x 2-way + 2 x Aux Controlla due altoparlanti a 2 vie e due subamplificatori.
Introduzione Introduzione all'unità SP2060 2 x 3-way Controlla due altoparlanti a 3 vie.
Introduzione all'unità SP2060 Introduzione 4 way +2 x Aux Controlla un altoparlante a 4 vie e due subamplificatori.
Introduzione Introduzione all'unità SP2060 5-way + Aux Controlla un altoparlante a 5 vie e un subamplificatore.
Introduzione all'unità SP2060 Introduzione 6-way Controlla un altoparlante a 6 vie.
Introduzione Introduzione all'unità SP2060 Multi Zone Trasmette solamente i componenti di frequenza (recuperandoli dai segnali di ingresso) adatti alle caratteristiche di risposta di ciascun altoparlante collegato ai sei connettori di uscita.
Introduzione all'unità SP2060 Introduzione Esempi di sistema Elaborazione degli altoparlanti Introduzione all'unità SP2060 Questo schema è un esempio di sistema stereo a 3 vie. Il connettore di ingresso AES/EBU dell'unità SP2060 consente di effettuare il collegamento direttamente all'uscita AES/EBU di un mixer digitale. Le configurazioni preimpostate sono 3 x 2-way, 2 x 3-way, 4-way + 2 x Aux, 5-way + Aux e 6-way. (Vedere a pagina 10.
Elaborazione delle zone Questo è un esempio di sistema stereo a 3 zone in cui l'unità SP2060 è utilizzata come distributore del segnale piuttosto che come crossover. La regolazione del routing consente di creare un sistema mono a 6 zone. È possibile regolare l'EQ (equalizzazione), il Delay (ritardo) e il Level (livello) per ciascuna uscita.
Introduzione all'unità SP2060 Introduzione Uso di più unità SP2060 Introduzione all'unità SP2060 Questo è un esempio di sistema che usa CobraNet™ per trasferimenti digitali a lunga distanza tra la cabina di regia e la sala degli amplificatori. I segnali audio della console di missaggio digitale PM5D Yamaha, il segnale del microfono talkback, la sorgente chime e così via, sono inviati all'unità DME64N.
Routing OUT 2 Hi S OUT 3 Low D OUT 4 Hi D OUT 5 Sub mono Area al di sotto della balconata IN B OUT 6 Gradino della scala (mono) IN A OUT 5 Area al di sotto della balconata 1 Area al di sotto della balconata 2 Area al di sotto della balconata 3 Area al di sotto della balconata 4 Ridotto OUT 6 Camerini OUT 1 OUT 2 IN A+B OUT 3 OUT 4 Ridotto/ camerini IN B Controlli e connettori D Low S Controlli del pannello IN A+B OUT 1 Impostazioni di rete IN A Riferimenti S Introduzione all'
Introduzione Controlli e connettori Pannello frontale 1 2 3 4 5 6 7 % ^ Introduzione all'unità SP2060 YES STORE RECALL A NO 8 !9 @) # Controlli e connettori 1 Display Visualizza i parametri selezionati da modificare e le informazioni sulla scena richiamata correntemente. Rimuovere la pellicola protettiva trasparente applicata prima della consegna dalla fabbrica. 2 Tasto [BACK/STORE] Seleziona il parametro precedente. Nella schermata Scene memorizza la scena selezionata.
Introduzione Controlli e connettori Pannello posteriore º ¡ 5 4 3 2 1 * * Connettore [AC IN] Da collegare all'impianto elettrico mediante il cavo di alimentazione in dotazione. Prima collegare il cavo di alimentazione all'unità SP2060, quindi inserire la spina del cavo di alimentazione in una presa elettrica. ( Porta [NETWORK] Si tratta di una porta Ethernet 100Base-TX/10Base-T per il collegamento a un computer oppure ad altri dispositivi in rete.
Introduzione Controlli del pannello Operazioni di base Questa sezione illustra le funzioni dei tasti del pannello e le relative schermate. Icona di conferma Modifica dei valori dei parametri Introduzione all'unità SP2060 È possibile regolare le impostazioni dei parametri, come l'EQ, in base alla risposta degli altoparlanti o all'acustica di un ambiente specifico. Questa sezione illustra a titolo esemplificativo come modificare il tempo di delay del canale di uscita 1. 1.
DELAY EQ (Equalizzatore) È possibile impostare il tempo di delay del segnale per ciascun canale di ingresso e uscita. Impostare il parametro On/Off su On per ritardare il segnale oppure su Off per bypassare il delay. Un EQ consente di amplificare o tagliare il livello delle gamme di frequenza specificate. L'EQ interno dell'unità SP2060 elabora i segnali di ingresso e uscita.
Controlli del pannello Introduzione 1. Per selezionare la schermata EQ, premere il tasto [EQ]. IN A ON/OFF = ON Introduzione all'unità SP2060 2. Premere il tasto [SEL] per il canale desiderato. Si accende il LED dei tasti [SEL] per il canale selezionato e viene visualizzato il nome del canale corrispondente. Per accendere i LED dei tasti [SEL] e selezionare il canale SUM, premere i tasti [SEL] per i canali A e B.
Routing di ingresso È possibile convogliare i segnali dei canali di ingresso A, B e SUM all'ingresso Crossover. È possibile selezionare segnali di ingresso digitali o analogici. Questa selezione si collega all'impostazione del master word clock. È anche possibile convogliare il canale sinistro di un segnale di ingresso ricevuto dal connettore [INPUT A] o [DIGITAL IN] ad entrambi i canali di ingresso A e B.
Controlli del pannello Introduzione X-OVER (Crossover) Impostazione del Crossover 4. Premere i tasti [▲INC]/[▼DEC] per impostare il valore del parametro.
• I nomi dei tipi sono abbreviati sul display dell'unità SP2060. Ad esempio "24dB/Oct Bessel" viene visualizzato come "24Bessel". • Se si seleziona "Ad just Gc" per il parametro Type, viene visualizzata la pagina Gc. L'utilizzo delle librerie facilita il richiamo delle impostazioni migliori per gli altoparlanti. Sono disponibili fino a 60 librerie per ciascun componente mediante l'applicazione DME Designer. • Bessel Questo filtro è incentrato sulle caratteristiche di fase.
Controlli del pannello Introduzione 5. Per confermare la selezione, premere il tasto [YES]. La libreria viene richiamata e l'unità torna alla schermata Library List. LIBRARY LIST IF2112/95 1. Per selezionare la schermata Limiter, premere il tasto [LIMITER]. OUT 1 ON/OFF = ON Introduzione all'unità SP2060 2. Premere il tasto [SEL] per il canale Per annullare l'operazione di richiamo, premere il tasto [NO] invece del tasto [YES]. L'unità torna alla schermata Library List. desiderato.
Area preset È presente una scena preset per ciascuna delle 12 configurazioni. Queste scene sono numerate da 1 a 12. Ogni titolo di scena ha lo stesso nome del titolo della configurazione corrispondente. ] ] ] ] ] ] ] ] ] ] ] ] Le scene possono essere richiamate anche mediante l'applicazione DME Designer. Se il richiamo di una scena ha modificato la configurazione, l'uscita audio viene momentaneamente esclusa. 1.
Controlli del pannello Introduzione Memorizzazione delle scene Per memorizzare una scena (13–99) nell'area utenti, procedere come segue: S U GGE R I M E N T O Introduzione all'unità SP2060 Le scene possono essere memorizzate anche mediante l'applicazione DME Designer. 1. Per selezionare la schermata Scene Selection, premere il tasto [SCENE]. 25:FOH(Event A) [2x(2way+SUB)L] 3. Premere i tasti [▲INC]/[▼DEC] per modificare il carattere.
La funzione Utility consente di visualizzare lo stato del word clock e di effettuare impostazioni di rete. Per ulteriori informazioni su come effettuare impostazione di rete, vedere a pagina 39. INPUT A/B LINK 6. Per confermare la modifica, premere il tasto [YES]. L'unità applica la modifica e torna alla schermata Scene Edit. S U GGE R I M E N T O È possibile attivare e disattivare la protezione mediante l'applicazione DME Designer.
Controlli del pannello Introduzione 6. Per confermare l'operazione, premere il tasto [YES]. "ON" (o "OFF") che lampeggiava si accende costantemente e il cursore torna nella posizione "ON" (o "OFF"). Introduzione all'unità SP2060 INPUT A/B LINK ARE YOU SURE? Per annullare l'operazione e tornare all'impostazione originale, premere il tasto [NO]. N OTA Se si imposta INPUT A/B LINK su "ON", i parametri collegati per il canale A saranno copiati sui parametri del canale B.
Impostazione della password per la funzione User Lock Se si preme il tasto [NO] a questo punto, si tornerà alla schermata precedente e la password non verrà specificata. PASSWORD SETUP **** È possibile specificare una password per la funzione User Lock. Come password specificare un numero a quattro cifre (0–9). Introduzione all'unità SP2060 1. Per selezionare la schermata Utility, premere il tasto [UTILITY]. Viene visualizzata l'ultima schermata Utility utilizzata.
Controlli del pannello Introduzione Impostazione della funzione Last Memory Resume È possibile scegliere che all'avvio l'unità SP2060 richiami la scena selezionata prima dello spegnimento del dispositivo oppure si avvii nello stesso stato in cui si trovava all'ultimo spegnimento. L'impostazione predefinita é "ON". Introduzione all'unità SP2060 OFF: all'avvio l'unità SP2060 richiama la scena selezionata prima dello spegnimento.
Visualizzazione del word clock Controllo della batteria di backup Il word clock varia a seconda delle impostazioni di routing di ingresso. È possibile visualizzare lo stato corrente del word clock sul display. Può essere visualizzata una delle seguenti sei sorgenti di word clock: Per controllare lo stato della batteria di backup interna, procedere come segue: Per i segnali di ingresso digitali: L'unità SP2060 si sincronizza su un clock esterno (immesso mediante il connettore AES/EBU).
Controlli del pannello Introduzione Inizializzazione dell'unità SP2060 Per inizializzare la memoria interna, procedere come segue: È possibile selezionare uno dei seguenti tipi di inizializzazione: * Introduzione all'unità SP2060 * * Inizializzazione del backup della scena corrente [CURRENT BACKUP] Inizializzazione di tutte le impostazioni utente, ad eccezione delle librerie, ai valori originali di fabbrica [WITHOUT LIB.
Quando si collega un computer all'unità SP2060 via Ethernet, è necessario installare sul computer il driver DME-N Network. Il driver DME-N Network può essere scaricato dal sito Web di Yamaha. IP ADDRESS 192.168.000.003 Indirizzo di rete 1. Per selezionare la schermata Utility, premere il tasto [UTILITY]. Viene visualizzata l'ultima schermata Utility utilizzata. 2. Premere più volte il tasto [UTILITY], [NEXT] o [BACK] finché non viene visualizzata la pagina MASTER/SLAVE.
Impostazioni di rete Introduzione 6. Per confermare l'impostazione, premere il tasto [YES]. L'impostazione è applicata e l'unità torna alla pagina IP Address. Introduzione all'unità SP2060 Impostazione dell'ID del Master Le unità SP2060 che fungono da slave in un gruppo di dispositivi sono in comunicazione con l'unità SP2060 master dello stesso gruppo e si conformano ad essa. Per impostare l'ID del master sulle unità SP2060 slave, procedere come segue.
Introduzione Impostazioni di rete Visualizzazione dell'indirizzo MAC Per visualizzare l'indirizzo MAC dell'unità SP2060, procedere come segue: NOTA Introduzione all'unità SP2060 In alcuni casi potrebbe non essere necessario impostare l'indirizzo MAC mediante il driver DME-N Network quando l'unità SP2060 è in comunicazione con DME Designer. 1. Per selezionare la schermata Utility, premere il tasto [UTILITY]. Viene visualizzata l'ultima schermata Utility utilizzata. 2.
Introduzione Riferimenti Informazioni sulle librerie preset Nome del file Introduzione all'unità SP2060 LIBRARY LIST IF211264_pa_sub Nome del modello Controlli e connettori • • • • • Modalità Uso come drive subwoofer LIBRARY LIST IF2112AS_bi_moni Nome del modello Modalità Floor monitor drive pa........................ modalità passiva* bi ........................ modalità Bi-amp tri........................ modalità Tri-amp sub...................... in combinazione con un subwoofer** moni ..........
Introduzione Riferimenti Librerie per processori per altoparlanti a 1 via N OTA Altoparlanti in uso Nome della libreria Spiegazione IS1118 e IS1218 IS1118_IS1218 Questa impostazione può essere condivisa da IS1118 e IS1218 quando sono usati in combinazione con IF2112 (M), IF2115 (M) o IF3115. IS1215 IS1215 Questa impostazione è usata per IS1215 quando è usato in combinazione con IF2112 (M), IF2115 (M) o IF3115.
Riferimenti Introduzione Altoparlanti in uso Nome della libreria Uso come subwoofer* Per un floor monitor IF211564_pa – – IF211564_pa ✓ – IF2115/64 IF211595_pa – – IF211595_pa_sub ✓ – IF211599_pa – – IF211599_pa_sub ✓ – IF2115M64_pa – – IF2115M64_pa_sub ✓ – IF2115M95_pa – – IF2115M95_pa_sub ✓ – IF2115/95 Introduzione all'unità SP2060 IF2115/99 IF2115M/64 IF2115M/95 IF2115M99_pa – – IF2115M99_pa_sub ✓ – IF2115M/99 Controlli e connettori * Questa impostazione val
Altoparlanti in uso Nome della libreria Uso come subwoofer* Per un floor monitor IF211564_bi – – IF211564_bi_sub ✓ – Introduzione Riferimenti IF2115/64 IF211595_bi – – IF211595_bi_sub ✓ – IF211599_bi – – IF211599_bi_sub ✓ – IF2115M64_bi – – IF2115M64_bi_sub ✓ – IF2115M95_bi – – IF2115M95_bi_sub ✓ – Introduzione all'unità SP2060 IF2115/95 IF2115/99 IF2115M/64 IF2115M/95 IF2115M99_bi – – IF2115M99_bi_sub ✓ – IF311564_bi – – IF311564_bi_sub ✓ – IF311595_bi –
Riferimenti Introduzione Messaggi sul display Messaggi di avvertenza e di errore Introduzione all'unità SP2060 Controlli e connettori Controlli del pannello Impostazioni di rete Riferimenti 46 Messaggio Significato Cosa fare Duplicate IP Adr. Indirizzo IP duplicato. Cambiare l'indirizzo IP in modo che non vi siano duplicati. Illegal MAC Adr. È stato riscontrato un indirizzo MAC non valido. Ciò può essere dovuto a un malfunzionamento hardware.
Messaggi di stato Messaggio Significato Connecting Connessione alla rete in corso. Download Success Il programma è stato aggiornato con successo. Downloading Aggiornamento del programma in corso. NON spegnere l'unità finché è visualizzato questo messaggio. File Operating È in corso un'operazione su un file, durante la quale il computer opera su dati di scena. NON spegnere l'unità finché è visualizzato questo messaggio. Network Setup Preparazione della connessione di rete in corso.
Riferimenti Introduzione Specifiche tecniche generali External Normal Rate: 44.1, 48 kHz (±0.1%) Double Rate: 88.2, 96 kHz (±0.1%) Internal 96 kHz Sampling Frequency Introduzione all'unità SP2060 Signal Delay Less than 761 µ sec (INPUT to OUTPUT @Fs=96kHz) Indicators Key indicators x 9 MUTE indicators (INPUT A/B, OUTPUT 1–6) 6-segment LED level meters (INPUT A/B, OUTPUT 1–6) Miscellaneous Power Consumption 30 W Dimensions (HxDxW) 44 x 361 x 480 mm Net Weight 4.
Crosstalk@1KHz Fs=96kHz Input Output Condizioni INPUT A OUTPUT 2, 4, 6 INPUT B OUTPUT 1, 3, 5 MIN TYP MAX Unità INPUT A assegnato a OUTPUT 1, 3 o 5 INPUT B assegnato a OUTPUT 2, 4 o 6 –80 dB INPUT A assegnato a OUTPUT 1, 3 o 5 INPUT B assegnato a OUTPUT 2, 4 o 6 –80 dB Introduzione Riferimenti Introduzione all'unità SP2060 *Il crosstalk è misurato con un filtro 18dB/oct @80kHz.
Riferimenti Introduzione Caratteristiche di input digitale Terminale Formato Lunghezza dati Livello Connettore DIGITAL INPUT AES/EBU AES/EBU 24 bit RS422 Tipo XLR-3-31 (bilanciato) *1 *2 *1. Il connettore di tipo XLR-3-31 con scanalatura è bilanciato. (1=TERRA, 2=CALDO, 3=FREDDO) *2. A 96 kHz è supportato solo il formato Double Speed. Il formato Double Channel o Single non è supportato.
Introduzione Riferimenti 480 Introduzione all'unità SP2060 Controlli e connettori 353,5 1,1 44 I piedini di gomma sono inclusi nella confezione. Controlli del pannello 439,9 2,5 360,2 (4,2) Dimensioni * Le specifiche e le descrizioni presenti in questo manuale sono fornite a fini puramente informativi. Yamaha Corp. si riserva il diritto di modificare prodotti o specifiche in qualsiasi momento senza preavviso.
Riferimenti Introduzione Indice [▲INC/YES]/[▼DEC/NO], tasti ........................................... 22 Controllo della batteria di backup ............................................ 37 100Base-TX ............................................................................ 40 [CURRENT BACKUP] .......................................................... 38 10Base-T ................................................................................. 40 2 x (2-way + Sub) ...................................
L.SHELF (shelving basso) ........................................................25 Richiamo delle scene ................................................................ 31 Label, pagina ............................................................................36 Richiamo di una libreria .......................................................... 29 Last Memory Resume, pagina ..................................................36 ROUTING ..................................................................
Introduzione Introduzione all'unità SP2060 Controlli e connettori Controlli del pannello Impostazioni di rete Riferimenti SP2060 Manuale di istruzioni 54 MEMO
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 U.S.A. Yamaha Corporation of America 6600 Orangethorpe Ave., Buena Park, Calif. 90620, U.S.A.
Yamaha Pro Audio global web site: http://www.yamahaproaudio.com/ Yamaha Manual Library http://www.yamaha.co.jp/manual/ U.R.G.