00_cv_SPM-K30.fm Page 1 Monday, August 17, 2009 5:21 PM English デジタルサウンドプロジェクター壁掛け金具 Svenska SUPPORT MURAL Deutsch WALL MOUNT BRACKET Français SPM-K30 Italiano Español Manuel d’installation Installationsanleitung Manuale d’installazione Русский Instllationsanvisningar Nederlands Installation Manual Manual de instalación Installatiehandleiding Руководство по установке All rights reserved.
DIMENSIONS DIMENSIONS ABMESSUNGEN MATTSKISSER DIMENSIONI DIMENSIONES AFMETINGEN ГАБАРИТЫ 各部の寸法 Large wall mount bracket Grand support mural Große Wandhalterung Stort väggmonteringsfäste Staffa di installazione a muro grande Soporte de montaje en pared grande Grote wandbevestigingsbeugel Большой кронштейн настенного крепления 壁掛け金具(大) ■ YSP-800/YSP-900 305 282.5 252.5 222.5 192.5 162.5 132.5 102.5 72.5 85 13.3 85 1.4kg 305 282.5 252.5 222.5 192.5 162.5 132.5 102.5 178.6 3- 7 10 28.
■ YSP-4000/YSP-40D/HTY-7040/YSP-4100/YSP-5100 355 332.5 302.5 272.5 242.5 212.5 182.5 152.5 122.5 92.5 A B A 1.4kg 355 332.5 302.5 272.5 242.5 212.5 182.5 152.5 228.6 3- 7 10 C 10 3- 7 92 112 28 28 28 28 228.6 24- 7x22 SPM-K30 YSP-4000/ YSP-40D/ HTY-7040/ YSP-4100/ YSP-5100 312.5 355 122.5 152.5 182.5 212.5 152.5 182.5 212.
Unit with bracket Le système avec son support Einheit mit Halterung Ljudprojektorn med fästet Unità con staffa Unidad con ménsula Toestel met de beugel Аппарат с кронштейном 取付時の寸法 ■ YSP-3000/YSP-30D/YSP-3050/HTY-7030 ■ YSP-800/YSP-900 19 19 134 171 (mm) ■ YSP-4000/YSP-40D/HTY-7040 (mm) ■ YSP-4100 23 167 18 (mm) ■ YSP-5100 18 107 iii (mm) 106.
SPM-K30 English WALL MOUNT BRACKET SPM-K30 Installation Manual Thank you very much for purchasing the Wall Mount Bracket SPM-K30. Be sure to read this manual thoroughly before using this bracket. After you have read this manual, retain it for future reference. When installing the Digital Sound Projector using this bracket, all installation work must be performed by a qualified contractor or dealer personnel. The customer must never attempt to perform this installation work.
ACCESSORIES ACCESSORIES Check that all of the following parts are included.
ASSEMBLING PROCEDURE The dimensions after assembling the parts vary depending on the type of the Digital Sound Projector. Check the positions of the screw holes before assembling the parts.
ASSEMBLING PROCEDURE YSP-4000, YSP-40D, HTY-7040, YSP-4100, YSP-5100 Projector mounting screws (M4) (supplied) A A 730 mm En 4
INSTALLATION PROCEDURE Make sure to leave adequate ventilation space around the unit and follow the instructions below. The illustrations used in each step are the examples of YSP-800 and YSP-900. 1 Attach the large wall mount bracket to the wall. In order to secure the unit to the wall, you will need to attach the bracket to the wall first in a manner befitting the structure and quality of the wall. Choose a location where the wall can bear the weight of the whole unit.
INSTALLATION PROCEDURE 3 Attach the small wall mount brackets to the Digital Sound Projector. The small wall mount brackets vary depending on the type of the Digital Sound Projector. Refer to the following table for details on the type of the Digital Sound Projector and the compatible small wall mound brackets (Type A or B).
INSTALLATION PROCEDURE English 4 Attach the safety wire. Attach the safety wire to the small wall mount bracket to prevent the Digital Sound Projector from falling. Safety wire Slip one end through the loop at the other end Slip the safety wire between the bracket and the projector Repeat the same procedure for the other bracket. 5 Mount the Digital Sound Projector on the wall.
INSTALLATION PROCEDURE 6 Secure the unit. Align the holes in the large wall mount bracket with the holes in the bottom of the small wall mount brackets, and then use two of the supplied projector mounting screws (M6 x 16) to secure the unit. The positions of the screw holes vary depending on the type of the Digital Sound Projector. Refer to the following illustrations and check the correct positions of the screw holes used to secure your Digital Sound Projector.
INSTALLATION PROCEDURE Pass the screws (commercially available) through the loops of the safety wires and then tighten the screws to secure the safety wires to the wall. Make sure that the screws are strong enough to bear the weight of the Digital Sound Projector and the brackets in case they fall. Screw (commercially available) Secure the safety wire to the wall. Secure the safety wire to the wall. Washer (supplied) Notes • Attach the safety wires tight. • Keep the 2 other washers for future use.
00_cv_SPM-K30.fm Page 1 Monday, August 17, 2009 6:21 PM English デジタルサウンドプロジェクター壁掛け金具 Svenska SUPPORT MURAL Deutsch WALL MOUNT BRACKET Français SPM-K30 Italiano Español Manuel d’installation Installationsanleitung Manuale d’installazione Русский Instllationsanvisningar Nederlands Installation Manual Manual de instalación Installatiehandleiding Руководство по установке All rights reserved.