Operation Manual
Table Of Contents
- DIMENSIONS
- English
- Français
- Deutsch
- SICHERHEITSANWEISUNGEN
- ZUBEHÖR
- INSTALLATIONSVORGANG
- 1 Befestigen Sie die große Wandhalterung an der Wand.
- 2 Nehmen Sie den Metallbeschlag vom Soundprojektor ab.
- 3 Befestigen Sie die kleinen Wandhalterungen an dem Soundprojektor.
- 4 Bringen Sie den Sicherheitsdraht an.
- 5 Montieren Sie den Soundprojektor an der Wand.
- 6 Sichern Sie das Gerät.
- 7 Befestigen Sie die Sicherungsdrähte an der Wand.
- Svenska
- Italiano
- NORME DI SICUREZZA
- ACCESSORI
- PROCEDURA DI INSTALLAZIONE
- 1 Applicare la grande staffa di installazione a muro su di un muro.
- 2 Rimuovere le parti metalliche dal proiettore audio.
- 3 Applicare le staffe di installazione a muro piccole al proiettore audio.
- 4 Applicare saldamente i fili di sicurezza.
- 5 Installare il proiettore audio sul muro.
- 6 Fermare quest'unità.
- 7 Fermare i fili di sicurezza al muro.
- Español
- INSTRUCCIONES DE SEGURIDAD
- ACCESORIOS
- PROCEDIMIENTO DE INSTALACIÓN
- 1 Coloque el soporte de montaje en pared grande en la pared.
- 2 Separe los aparatos de metal del proyector de sonido.
- 3 Coloque los soportes de montaje en pared pequeños en el proyector de sonido.
- 4 Coloque el cable de seguridad.
- 5 Monte el proyector de sonido en la pared.
- 6 Asegure la unidad.
- 7 Coloque los cables de seguridad en la pared.
- Nederlands
- VEILIGHEIDSINSTRUCTIES
- TOEBEHOREN
- INSTALLATIEPROCEDURE
- 1 Bevestig de grote wandbevestigingsbeugel aan de wand.
- 2 Maak het metalen onderdeel los van de Geluidsprojector.
- 3 Bevestig de kleine wandbevestigingsbeugels aan de Geluidsprojector.
- 4 Bevestig de veiligheidsdraad.
- 5 Bevestig de Geluidsprojector aan de wand.
- 6 Zet het toestel vast.
- 7 Bevestig de veiligheidsdraden aan de wand.
- Chinese
- Korean
- 日本語
INSTALLATION PROCEDURE
E-6
Align the holes in the large wall mount bracket with the holes in the bottom of the small wall mount brackets, and then
use two of the supplied projector mounting screws (M6 x 16) to secure the unit.
Pass the screws (commercially available) through the loops of the safety wires and then tighten the screws to secure the
safety wires to the wall.
Make sure that the screws are strong enough to bear the weight of the Sound Projector and the brackets in case they fall.
Attach the safety wires tight.
6 Secure the unit.
Bottom View
Sound Projector
Projector mounting
screws (M6)
7 Attach the safety wires to the wall.
Secure the safety wire to
the wall.
Washer
(commercially available)
Secure the safety wire
to the wall.
Screw
(commercially available)