NS-AP8600/SPS-8600 HOME CINEMA SPEAKER PACKAGE CONTENTS CONSUMER PRECAUTIONS ............................................................................ 2 UNPACKING .......................................................................................................3 ACCESSORIES .................................................................................................. 4 SETTING UP THE SPEAKERS ..........................................................................
CONSUMER PRECAUTIONS Read these precautions carefully before operating your NS-AP8600 speakers. Since these speakers can be wall mounted, it is essential that they are firmly secured. Be sure to consult a reliable source about the best type of hanger for your particular wall’s construction. Secure installation is the purchaser’s responsibility.
UNPACKING After unpacking, check that following items are contained.
ACCESSORIES Screws x 4 Satellite speaker support bases x 4 Fasteners Speaker cable x 1 for Satellite speakers x4 for Center speaker x2 Non-skid pads x 12 4 NS-AP8600/SPS-8600
SETTING UP THE SPEAKERS Stand mounting for the satellite speakers You need a Phillips screwdriver for assembly of the speaker stand. Be sure to use the correct screw type. 3 Pass the speaker cable through the speaker stand from the under side of the speaker stand. Speaker cable 1 Remove the adapter from the stand. Adapter Speaker stand Screw Speaker stand 2 Put the non-skid pads to the base as shown below. 4 Non-skid pad Pass the speaker cable through the hole in the adapter.
5 Connect the speaker cable to the speaker’s terminal correctly. 7 Push the speaker and adapter into the speaker stand. Satellite speaker Satellite speaker Adapter Speaker cable Adapter Speaker cable Speaker stand 6 Attach the adapter to the speaker with the screw. 8 Attach the adapter to the speaker stand with the screw. Satellite speaker Adapter Satellite speaker Speaker stand Speaker cable Adapter Screw 9 Screw Place the speaker stand on its side.
Setting up the satellite speakers on the shelf 1 Attach the satellite speaker support base to the speaker with the screw. 3 Put the fastener to the satellite speaker support base as shown below. Satellite speaker Satellite speaker Satellite speaker support base Speaker cable Fastener 2 1 Satellite speaker support base Screw 2 Connect the speaker cable to the speaker’s terminal correctly.
Wall mounting for the satellite speakers Wall / wall support A screw with a diameter of 1/4” can be used (Hole depth: 9/32”) 145 mm (5-3/4”) 66 mm (2-5/8") You can also use the screw holes on the back of the speaker for installing the speakers on commercially available speaker brackets.
Mounting the center speaker Place the center speaker on top of the TV, on the floor in front of the TV or inside the TV rack so that it is stable. When placing the speaker on top of the TV, put the provided fasteners at two points on both the bottom of the speaker and on top of the TV to prevent the speaker from falling. Speaker on top of the TV TV set 1 Fasteners Speaker inside the TV rack 2 Notes Do not place the speaker on top of the TV whose area is smaller than the bottom area of the speaker.
CONNECTIONS TO THE RECEIVER CONNECTIONS Check to make sure that the power has been turned off before making connections. Connect the (+) terminal of the amplifier to the (+) terminal of the speaker. Connect the (–) terminal of the amplifier to the (–) terminal of the speaker. Reversing polarity (+/–) will result in unnatural sound reproduction. PROCEDURE For connections, keep the speaker cords as short as possible. Do not bundle or roll up the excess part of the cords.
SPEAKER PLACEMENT This speaker is designed to be used as a front, center, surround or effects speaker. — Front speaker placement should be separated by a distance of 6–10ft. If they are placed too close together, there will be a reduction in the stereo effect. Conversely, If placed too for apart, the so called “middleomission” effect will occur and the vocal center fill will be lost. Height of the speaker should be at least at ear level.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CA 90620 http://www.yamaha.
