User Manual
Table Of Contents
- CONTENTS
- INTRODUCTION
- PART NAMES AND FUNCTIONS
- PREPARATION
- PLAYBACK
- ADDITIONAL FEATURES
- CONFIGURATION
- TROUBLESHOOTING
- Check the following first when any problem occurs
- When a problem occurs: Power or overall functionality
- The power turns off suddenly
- The power cannot be turned on
- No operations can be performed from the sound bar’s controls
- All indicators are off although the power is on (the power appears to be off)
- The sound bar does not function correctly
- The sound bar turns on by itself
- The sound bar cannot be controlled with the remote control
- The sound bar cannot be controlled using the TV’s remote control
- When a problem occurs: Audio
- When a problem occurs: Bluetooth®
- When a problem occurs: App
- Other actions
- APPENDIX
Showing the type of audio signal and settings for
functions
The type of audio signal being played and settings for the sound bar’s functions can be confirmed.
1 Press INFO.
The indicators on the sound bar will show the following information on the type of audio
signal and the settings for functions for three seconds immediately after INFO is pressed.
a b c d
a
The type of audio signal
TV glows white: Dolby Digital
TV glows red: DTS
OPTICAL glows white: AAC
TV and OPTICAL off: PCM or no input signal
b
Whether Dolby Pro Logic II is enabled or disabled
Glows: enabled
Off: disabled
NOTE
Dolby Pro Logic II is enabled automatically when 2-channel stereo signals are played in surround.
c
Whether the Bass Extension function is enabled or disabled
Glows: enabled
Off: disabled
d
Whether the Clear Voice function is enabled or disabled
Glows: enabled
Off: disabled
42
ADDITIONAL FEATURES > Showing the type of audio signal and settings for functions