User Manual
Table Of Contents
- CONTENTS
- INTRODUCTION
- PART NAMES AND FUNCTIONS
- PREPARATION
- PLAYBACK
- ADDITIONAL FEATURES
- CONFIGURATION
- TROUBLESHOOTING
- Check the following first when any problem occurs
- When a problem occurs: Power or overall functionality
- The power turns off suddenly
- The power cannot be turned on
- No operations can be performed from the sound bar’s controls
- All indicators are off although the power is on (the power appears to be off)
- The sound bar does not function correctly
- The sound bar turns on by itself
- The sound bar cannot be controlled with the remote control
- The sound bar cannot be controlled using the TV’s remote control
- When a problem occurs: Audio
- When a problem occurs: Bluetooth®
- When a problem occurs: App
- Other actions
- APPENDIX
APPENDIX
Specifications of the Sound Bar
The specifications of the Sound Bar are as follows.
Amplifier section
Maximum rated output power
(
Front L/R 30 W × 2 channels
(
Subwoofer 60 W
Speaker section
Front L/R
(
Type
Acoustic suspension type
(non-magnetic shielding)
(
Driver 5.5 cm (2-1/8") cone × 2
(
Frequency response 160 Hz to 22 kHz
(
Impedance 6 Ω
Tweeter
(
Type Acoustic suspension type (magnetic shielding)
(
Driver 2.5 cm (1") dome × 2
(
Frequency response 7 kHz to 23 kHz
(
Impedance 6 Ω
Subwoofer
(
Type Bass reflex type (non magnetic shielding)
(
Driver 7.5 cm (3") cone × 2
(
Frequency response 55 Hz to 160 Hz
(
Impedance 3 Ω (6 Ω × 2)
Decoder
Supported audio signal
(HDMI (ARC)/optical input)
PCM (up to 2 channels)
Dolby Digital (up to 5.1 channels)
DTS Digital Surround (up to 5.1 channels)
Input jacks
Digital (optical) 2 (TV, OPTICAL)
73
APPENDIX > Specifications of the Sound Bar