User Manual
Table Of Contents
- CONTENTS
- INTRODUCTION
- PART NAMES AND FUNCTIONS
- PREPARATION
- PLAYBACK
- ADDITIONAL FEATURES
- CONFIGURATION
- Enabling/disabling the HDMI Control function
- Enabling/disabling the Auto Power Standby function
- Enabling/disabling the Child Lock function
- Enabling/disabling the Bluetooth Standby function
- Enabling/disabling the Bluetooth function
- Setting the dynamic range compression level
- Changing frequency characteristics according to how the sound bar is installed
- Initializing the sound bar
- TROUBLESHOOTING
- Check the following first when any problem occurs
- When a problem occurs: Power or overall functionality
- The power turns off suddenly
- The power cannot be turned on
- No operations can be performed from the sound bar’s controls
- All indicators are off although the power is on (the power appears to be off)
- The sound bar does not function correctly
- The sound bar turns on by itself
- The sound bar cannot be controlled with the remote control
- The sound bar cannot be controlled using the TV’s remote control
- When a problem occurs: Audio
- When a problem occurs: Bluetooth®
- When a problem occurs: App
- Other actions
- APPENDIX
Enabling/disabling the Auto Power Standby function
Enabling the Auto Power Standby function turns off the sound bar in any of the following situations.
(
No control operations for eight hours
(
No audio input and no control operations for 20 minutes (except when ANALOG is selected as the input
source)
The default setting varies depending on the model.
Models for U.S.A., Canada, Mexico, Australia, China and Taiwan: Disabled
Models for Europe, U.K., Korea, and other areas: Enabled
1 Turn off the sound bar.
2 While holding down y on the sound bar, hold down z for at least five seconds.
The Auto Power Standby function switches from enabled to disabled, or from disabled to
enabled.
The indicator shows the setting applied as follows, and the sound bar is turned on.
Glows: disabled
Off: enabled
48
CONFIGURATION > Enabling/disabling the Auto Power Standby function