User Manual
Table Of Contents
- CONTENTS
- INTRODUCTION
- PART NAMES AND FUNCTIONS
- PREPARATION
- PLAYBACK
- ADDITIONAL FEATURES
- CONFIGURATION
- Enabling/disabling the HDMI Control function
- Enabling/disabling the Auto Power Standby function
- Enabling/disabling the Child Lock function
- Enabling/disabling the Bluetooth Standby function
- Enabling/disabling the Bluetooth function
- Setting the dynamic range compression level
- Changing frequency characteristics according to how the sound bar is installed
- Initializing the sound bar
- TROUBLESHOOTING
- Check the following first when any problem occurs
- When a problem occurs: Power or overall functionality
- The power turns off suddenly
- The power cannot be turned on
- No operations can be performed from the sound bar’s controls
- All indicators are off although the power is on (the power appears to be off)
- The sound bar does not function correctly
- The sound bar turns on by itself
- The sound bar cannot be controlled with the remote control
- The sound bar cannot be controlled using the TV’s remote control
- When a problem occurs: Audio
- When a problem occurs: Bluetooth®
- When a problem occurs: App
- Other actions
- APPENDIX
No surround effect
(
Stereo playback is selected.
Select surround playback.
(
“Surround playback”(p.35)
(
The volume is too low.
Turn up the volume.
(
“Basic control during playback”(p.32)
(
The TV or AV device is set to output 2-channel audio (such as PCM) only.
Change the audio output setting on the TV or AV device to output Bitstream audio signals.
(
Sound is also heard from the TV’s built-in speakers.
Turn the TV’s volume all the way down.
(
You are listening from a position that’s extremely close to the sound bar.
You should listen at some distance from the sound bar.
69
TROUBLESHOOTING > When a problem occurs: Audio