User Manual
Table Of Contents
- CONTENTS
- INTRODUCTION
- PART NAMES AND FUNCTIONS
- PREPARATION
- PLAYBACK
- ADDITIONAL FEATURES
- CONFIGURATION
- Enabling/disabling the HDMI Control function
- Enabling/disabling the Auto Power Standby function
- Enabling/disabling the Child Lock function
- Enabling/disabling the Bluetooth Standby function
- Enabling/disabling the Bluetooth function
- Setting the dynamic range compression level
- Changing frequency characteristics according to how the sound bar is installed
- Initializing the sound bar
- TROUBLESHOOTING
- Check the following first when any problem occurs
- When a problem occurs: Power or overall functionality
- The power turns off suddenly
- The power cannot be turned on
- No operations can be performed from the sound bar’s controls
- All indicators are off although the power is on (the power appears to be off)
- The sound bar does not function correctly
- The sound bar turns on by itself
- The sound bar cannot be controlled with the remote control
- The sound bar cannot be controlled using the TV’s remote control
- When a problem occurs: Audio
- When a problem occurs: Bluetooth®
- When a problem occurs: App
- Other actions
- APPENDIX
APPENDIX
Specifications of the Sound Bar
The specifications of the Sound Bar are as follows.
Amplifier section
Maximum rated output power
(
Front L/R 20 W × 2 channels
(
Subwoofer 30 W
Speaker section
Front L/R
(
Type
Acoustic suspension type
(non-magnetic shielding)
(
Driver 4.6 cm (1.8") cone × 2
(
Frequency response 230 Hz to 22 kHz
(
Impedance 6 Ω
Subwoofer
(
Type Passive radiator type (non magnetic shielding)
(
Driver 7.5 cm (3") cone × 1
(
Frequency response 65 Hz to 230 Hz
(
Impedance 4 Ω
Decoder
Supported audio signal
(HDMI (ARC)/optical input)
PCM (up to 2 channels)
Dolby Digital (up to 5.1 channels)
Input jacks
Digital (optical) 2 (TV, OPTICAL)
Analog (3.5 mm stereo mini) 1 (ANALOG)
Output jacks
HDMI 1 (HDMI OUT/TV (ARC))
78
APPENDIX > Specifications of the Sound Bar