User Manual

Table Of Contents

Notice

Indicates points that you must observe in order to prevent product failure, damage

or malfunction and data loss.

Power supply

• If not using the unit for a long period of time, be sure to pull the power plug from

the outlet. Even if this unit is turned off by [z](Standby/On), a minute current is

still flowing.

Installation

• Do not use this unit in a location that is exposed to direct sunlight that becomes

extremely hot, such as near a heater, or extremely cold, or that is subject to

excessive dust or vibration. Failure to observe this may cause the unit's panel to

become deformed, the internal components to malfunction, or for operation to

become unstable.

• If using a wireless function, avoid installing this unit near metal walls or desks,

microwave ovens, or other wireless network devices.

Obstructions could shorten the transmission distance.

Connections

• If connecting external units, be sure to thoroughly read the manual for each unit

and connect them in accordance with the instructions.

Failure to properly handle a unit in accordance with the instructions could cause

malfunctions.

• Do not connect this unit to industrial units.

This unit has been designed to connect to a consumer-use unit. Connection to an

industrial unit could cause this unit to malfunction.

Handling

• Do not place vinyl, plastic, or rubber products on this unit. Failure to observe this

may cause discoloration or deformation in the panel of this unit.

• If the ambient temperature changes drastically (such as during unit transportation

or under rapid heating or cooling) and there is a chance condensation may have

formed in the unit, leave the unit for several hours without turning on the power

until it is completely dry before use. Using the unit while there is condensation can

cause malfunctions.

Maintenance

• When cleaning the unit, use a dry, soft cloth. Using chemicals such as benzine or

thinner, cleaning agents, or chemical scrubbing cloths can cause discoloration or

deformation.

Speakers

• Do not touch the speaker units. Failure to observe this may damage the speaker

units.

Disposal or transfer

• Be sure to discard used batteries in accordance with local regulations.

• If you plan to transfer ownership of this product, include this document and the

supplied accessories along with the product.

• Follow the rules of your local authority to dispose of this product and its

accessories.