User Manual

5 Peel off the backing paper from the spacers B (included), and attach the adhesive
face of each spacer to the rear of the sound bar.
Spacers B
6 Connect cables to the sound bar.
For the connection procedure, see the Quick Start Guide or User Guide of your product.
7 Hang the sound bar on the screws.
Sound bar screw-hanging
holes
IndicatorsRemote control sensor
When installation and all connections are complete, while the power is off, hold down BASS EXT on the
sound bar’s remote control for at least five seconds to optimize the frequency characteristics setting for wall
mounting. The indicators show the setting status as follows, and the sound bar is turned on.
Remote control
Hold down for at least five seconds
while the power is off.
8
Mounting the sound bar on a wall