manual
12
En
Listening to the sound from a
Bluetooth device
You can play back wirelessly from Bluetooth devices, such as smartphones or digital
music players.
See also the operating manual of the Bluetooth device for more details.
Pairing a Bluetooth device with the unit
When connecting to a Bluetooth device for the first time, “pairing” between the device
and unit is required. Once “pairing” with a device is completed, subsequent connection
with that device will not require “pairing.”
1 Press the BLUETOOTH key on the supplied remote control to select
Bluetooth as the input source.
The BLUETOOTH indicator on the front panel lights up in green.
2 Turn on the Bluetooth function of the device to be paired, and
perform pairing.
The operation varies depending on the device. Refer to the operation manual of the
device.
3 Select “SRT-1000 Yamaha” in the Bluetooth device list on the device.
If a passkey (PIN) is required, enter the number “0000.”
When pairing is completed, or a completion message appears on the device.
NOTE
• Perform pairing with the Bluetooth device and unit within 10 meters (33 ft) of each other.
• Up to eight Bluetooth devices can be paired with the unit. If a ninth device is paired, the oldest pairing
information is deleted.
• If pairing information for a device is deleted, to use that device again, pairing of the device is required
again.
• If a Bluetooth device is already connected to the unit, terminate that Bluetooth connection (p.13), then
perform pairing with the new device.
• Refer to “Bluetooth” (p.20) in “Troubleshooting” if pairing cannot be achieved.
Perform the following steps to use a Bluetooth device with the unit.
Bluetooth devices
Playing back audio from a Bluetooth device on the unit
For the first Bluetooth
connection
Pairing a
Bluetooth device
with the unit
For subsequent
Bluetooth connection
Lights up