manual

17
En
By enabling the auto power standby function, you can avoid forgetting to turn off the unit
after use, or if you fall asleep while watching TV.
NOTE
• When the auto power standby function is enabled and one of the following conditions is met, the unit will
automatically turn off.
− No operation for 8 hours
− No audio input and no operations for 20 minutes when BLUETOOTH is selected as the input source.
1 With the unit turned off, hold down the MUTE key on the unit’s
remote control for more than 5 seconds to enable/disable the auto
power standby function.
You can check the status of the auto power standby function with the BD/DVD
indicator when turning on the unit.
HINT
• Initial setting varies depending on the country or region.
− U.K. and Europe models: enabled
− Other models: disabled
Follow the procedure below to initialize the unit.
1 Turn off the unit.
2 Hold down (power) on the front panel of the unit for more than 3
seconds.
Setting the auto power standby function
Initializing the settings of the unit
Off (enabled), lights up (disabled)
Flash (initialized)