日本語 English Deutsch 取扱説明書 Owner’s Manual Bedienungsanleitung Mode d’emploi Manual de instrucciones Español Français Pickup Mute
Yamaha Silent Brass Pickup Mute Thank you for purchasing the Yamaha Silent Brass Pickup Mute. In order to obtain the maximum performance and enjoyment from your Pickup Mute, we urge you to read this Owner’s Manual thoroughly before using. Please keep this Owner’s Manual in a safe place for later reference. Contents of Set ● Pickup Mute PM9/PM7/PM6/PM5/PM3/PM2/PM1 ● Cable ● Owner’s Manual * Personal Studio ST7 is not included.
■ Pickup Mute Specifications Pickup Mute Instrument Dimensions (diameter x length) Maximum hand rest Weight width PM9 Piccolo Trumpet 70 x 145 mm (2-3/4" x 5-11/16") — 80g (2.8oz.) PM7 Trumpet, Cornet 70 x 200 mm (2-3/4" x 7-7/8") — 120g (4.2oz.) PM6 Flugelhorn, Alto Trombone PM5 Trombone, Bass Trombone PM3 French horn PM2 Euphonium PM1 Tuba 108 x 270 mm (4-1/4" x 10-5/8") — — 150mm 300g (10.5oz.) 190 x 410 mm (7-1/2" x 16-1/8") 220mm 800g (1lbs.,12oz.
Your Pickup Mute will give you years of reliable service if you follow the simple rules given below: ■ Location Do not expose it to the following conditions to avoid deformation, discoloration, or more serious damage. • Direct sunlight (e.g. near a window). • High temperatures (e.g. near a heat source, out side, or in a car during the daytime). • Excessive humidity. • Excessive dust. • Strong vibration. ■ Handling and Transport • Never apply excessive force to the controls, connectors or other parts.
Set up and Use ■ Personal Studio ST7 Connecting Cable PICKUP MUTE 1 2 PHONES 1 2 Stereo Earphone PM7 for TRUMPET PM6 for FLUGELHORN Lock Nut PM5 for TROMBONE Hand Rest (P.
Before connecting the cable and attaching the mute, make sure the power is switched OFF and the earphones are removed from your ears. PICKUP MUTE 1 2 PHONES 1 2 Stereo Earphone Head Connecting Cable ■ Assembling the PM1 Handle Lock Nut Body 1. Lay the Head on the floor. Inner Head hook 2. PM1 for TUBA Place the Body on the Head and fasten with the three hooks. 3. Fully extend the Inner Head that is located in the center of the Head. * Refer to pg.
QUICK GUIDE Attaching and removing the pickup mute ■ Attach the Pickup Mute to the Tuba As shown in the illustration, hold the instrument with your left hand and, while turning the pickup mute, firmly insert it into the bell with your right hand. 1. For Euphoniums, with the bell facing up, hold the PM2 by its handle in your right hand and firmly insert it into the bell. 4. 16 2. After assembling the Pickup Mute (refer to pg. 15) lay it on its side. While seated, hold the tuba between your legs.
Holding the mute when playing the horn standing up The following cautions are for your own safety and to avoid possible damage to and malfunctioning of the equipment, and thus should be observed carefully. ● Firmly insert the PICKUP MUTE into the bell of the instrument. ● Avoid dropping the PICKUP MUTE. Dropping the mute may result in damage. Also, shock to the ear from the noise produced by dropping the mute may result in damage to your hearing.
QUICK GUIDE Insert firmly Signal path REHEARSAL ROOM CONCERT HALL CHURCH REVERB MODE From PHONES 1 Tighten the Lock Nut AUX IN REVERB LEVEL Connect the supplied cable to the PICKUP MUTE output jack and tighten the LOCK NUT. PLAYER 2 MASTER VOLUME PLAYER 1 To PICKUP MUTE 1 Don’t step on the cable * Personal Studio ST7 and stereo earphone are not included. 18 Disconnecting the cable while the power is ON may result in damage to the unit.