Owner`s manual

16
QUICK GUIDE
As shown in the illustration, hold the
instrument with your left hand and, while
turning the pickup mute, firmly insert it
into the bell with your right hand.
Attaching and removing the
pickup mute
For Euphoniums,
with the bell facing
up, hold the PM2
by its handle in
your right hand
and firmly insert
it into the bell.
■ Attach the Pickup Mute to the Tuba
1. After assembling the Pickup Mute
(refer to pg. 15) lay it on its side.
While seated, hold the tuba
between your legs. Hold the
Pickup Mute by its handle and lift
it up.
2. Holding the Pickup Mute with
both hands, gently insert the
Inner Head into the bell of the
tuba. (Continue holding the
tuba between your legs.)
3. Adjust the Pickup Mute so that it is
positioned in the center of the bell.
* Noise will result if the Inner
Head is touching the bell.
4. Attach the mute fixing hooks to
the bell. If necessary, adjust
the length (tension) of the
hook belt.
5. Connect the lock nut equipped
end of the supplied cable to the
Pickup Mute’s output jack and
secure the lock nut.
After removing the mute
from the instrument, lay the mute
on its side.
If the mute is stood vertically, the
Inner Head will collapse causing
a burst of noise in the earphone
that may result in hearing
impairments.
When putting the mute away,
hold the Inner Head with both
hands and gently collapse it back
into the Body. Strongly dropping
the Inner Head may result in
damage to the Mute.