User Manual

6.2. MASTER section
① MONITOR fader
Indicates and sets the monitor level.
Drag the fader area to change the value.
The position of the monitor level on the STAGEPAS 1K is shown by the indication at the right.
② MASTER fader
Drag the fader area to change the value.
The position of the master level on the STAGEPAS 1K is shown by the indication at the right.
③ MASTER level meter
Indicates the output signal level in real time in stereo.
The level meter shows levels up to -18 dB in green, up to 0 dB in yellow, and in red if the limiter is applied.
6. FADER screen
12 | 6.2. MASTER section