User Manual

Quick Start Guide
12 STAGEPAS 1K Owner’s Manual
Quick Start Guide
Attaching the line array speaker and
spacers
Use the included spacers to install the line array speaker
at approximately the same height as the ears of the
audience. The line array speaker features a grille.
1. Insert the line array speaker and
spacers firmly into the sockets
one by one.
Use the spacers as needed.
NOTE
Insert the line array speaker and spacers
firmly into the sockets. If the connectors are
not in contact sufficiently, no sound may be
output.
Connecting microphones, musical
instruments, or audio devices to the
mixer
Before making connections, lower the volume level to the
minimum by rotating the [LEVEL] controls counter-
clockwise.
 Connection example
2. Connect desired devices, such as a
microphone, or a musical instrument to the
input jacks of the mixer.
Getting sound out of the speaker
Make sure that the power to the STAGEPAS 1K is turned off.
3. Connect the plug on the included power
cord to the [AC IN] jack on the rear panel of
the unit.
Spacers x 2 Spacer x 1 No spacers
RL
RL
Electronic
Acoustic-electric
guitar
Microphone