User Manual
BTR-STP200 Owner’s Manual
7
NOTICE
Handling and maintenance
• To avoid over-discharge when not in use, the battery is
“locked” and will not function when rst shipped from
the factory. To unlock and enable the battery for rst
time use, you must install it in the intended product or a
specied battery charger, and then connect the product
or charger to an AC outlet using the dedicated power
cord.
• This product is a lithium-ion battery. Charge this product
before using it. Even if you plan not to use this product
for a long period of time, recharge it every six months
to maintain battery power. Otherwise, the product may
become unable to retain a charge.
• If you plan not to use this product for a long period
of time, remove the battery from the relevant device.
Otherwise, the batteries may be drained, or battery
liquid may leak, possibly resulting in damage to your
device.
• Do not remove the batteries from its original packaging
until required for use.
• Keep the batteries clean and dry.
• Wipe the battery terminals with a clean dry cloth if they
become dirty.
• Do not leave the batteries on prolonged charge when
not in use.
• If you plan not to use this product for a long period
of time, remove the battery from the relevant device.
Otherwise, the battery may be drained, or battery liquid
may leak, possibly resulting in damage to your device.
• Do not install this product in a place subject to
drastic changes in ambient temperature. Otherwise,
condensation may form inside and on the surface of
your device, resulting in damage to the device.
• If there is a reason to believe that condensation might
have occurred on or in the device, leave it for a while,
and then turn on the power to the device. Turning the
power on while condensation is present may cause
damage to the device.
• Do not use sodium hypochlorite solution, ethanol,
benzine, thinner, detergent or a chemical rag to clean
the surface of the product. Otherwise, the surface may
become discolored or deteriorate.