User Manual

Using this Product along with a DXL1K Powered Speaker
STAGEPAS 1K mkII Owner’s Manual 13
Using this Product along with a DXL1K Powered
Speaker
Playing audio in stereo
You can play audio in stereo by adding another
STAGEPAS 1K mkII unit or a DXL1K powered speaker.
1. Connect the [LINK] output jack of the
L-channel STAGEPAS 1K mkII to the [LINK]
input jack of the R-channel
STAGEPAS 1K mkII or DXL1K.
Use the L-channel STAGEPAS 1K mkII to input an
audio signal from the source.
NOTE
A signal input to the R-channel STAGEPAS 1K mkII (on
channels 1–3 or ST) will be played only from the R-channel
speaker.
2. Press the [MONO/ST MODE] switch to
engage STEREO mode of the L-channel
STAGEPAS 1K mkII.
The [STEREO] LED lights in STEREO mode.
Expanding the number of
input channels
You can double the number of input channels by
connecting two STAGEPAS 1K mkII units to each other.
Each STAGEPAS 1K mkII unit will operate as a monaural
channel.
1. Connect the [LINK] input jack and the [LINK]
output jack of one of the STAGEPAS 1K mkII
units to the [LINK] output jack and [LINK]
input jack of the other unit respectively.
2. Press the [MONO/ST MODE] switch to
engage MONO mode on both units.
The [STEREO] LED turns off in MONO mode.
R-channel L-channel
STAGEPAS 1K mkII
(R-channel)
STAGEPAS 1K mkII
(L-channel)
Off
STAGEPAS 1K mkII
(1st unit)
STAGEPAS 1K mkII
(2nd unit)
Off Off