User Manual
Table Of Contents
- PRECAUTIONS
- NOTICE
- Information
- Table of Contents
- Introduction
- Controls and Functions
- Quick Start Guide
- Using this Product along with a DXL1K Powered Speaker
- Playing Bluetooth® Audio
- Controlling the Unit from STAGEPAS Controller
- Initializing the STAGEPAS 1K mkII
- Storing the Unit
- Troubleshooting
- General Specifications
- Block Diagram
Controls and Functions
STAGEPAS 1K mkII Owner’s Manual 9
Rear panel
H [MIC/LINE] input jacks (channel 1-3)
Connect microphones, guitars, electronic musical
instruments or audio equipment. These are combo
jacks that support both XLR and phone plugs.
Channels 2 and 3 support Hi-Z.
I [LINK] input jack
This jack supports an XLR-type plug.
Connect the [LINK] output jack of the
STAGEPAS 1K mkII to the [LINK] input jack of a
second unit (another STAGEPAS 1K mkII or a
DXL1K) (see page 13 “Playing audio in stereo”).
We recommend that you use this jack if you plan to
input a line-level signal from an external device such
as a mixing console.
NOTE
A signal input at this jack is output directly from the
speaker.
To control the tone and volume level of the signal, use a
connected STAGEPAS 1K mkII or mixing console.
H
I
J
K
L
M
N
N
O P
XLR Phone