User Manual

7. MUSIC PLAYER/FADER screen
The MUSIC PLAYER/FADER screen consists of the FADER section, the MASTER section and the MUSIC PLAYER
section.
Here you can play back songs from your mobile device via Bluetooth®Audio from the STAGEPAS 1K. However,
you will need to pair with Bluetooth® audio separately from Bluetooth® control. If the device is not paired, or is
not connected with a STAGEPAS 1K that is paired for Bluetooth®Audio, then playback occurs on the mobile
device.
NOTE
• The first time you start the application, it requests permission to access the media library. Later on
your mobile device you can change the settings to permit or deny access.
• If the Location Permissions for the STAGEPAS Editor are not turned on, your app may not be able to
discover the STAGEPAS 1K. Turn ON the Location Permissions for your device and app to ensure
discoverability between the STAGEPAS Editor and 1K unit.
7.1. FADER section
① CLIP indicator
Lights red ( ) if the signal is clipping due to an excessive input level.
② Level indicator
Changes color according to the level.
From -60 dB to -18 dB this is lit green ( ) and up to 0 dB it is lit yellow ( ).
This is unlit if there is no input.
③ Fader level
Indicates the current fader level.
④ Fader level INC/DEC buttons
Tap the INC(+)/DEC(-) buttons to set the fader level.
7. MUSIC PLAYER/FADER screen
7.1. FADER section | 13