User Manual

STAGEPAS 200BTR STAGEPAS 200 Owner’s Manual
24
General Specifications
Main specifications
Speaker Section
Mixer and Amplifier Sections
* 0 dBu = 0.775 Vrms
*1 Power rating (120 V, 25°C). This is total value of individual output power. This value is measured by releasing the software protection.
Dynamic: Total peak power of individual outputs. Measured at minimum load impedance, with protection released.
Continuous: Measured at nominal impedance, with protection activated.
Battery (STAGEPAS 200BTR only)
* If this product is stored for twelve months under temperatures between −20°C and 25°C, the battery charge capacity will be reduced by about 10%.
* Battery charging time is an estimate for fully charging a completely exhausted battery. The time varies depending on the remaining battery level and ambient
temperature.
System Type
2-way, bi-amplified powered speaker + mixer
Frequency Range (−10dB)
60 Hz – 20 kHz
Coverage Angle (Horizontal × Vertical)
90° × 90°
Crossover
2.0 kHz, 24 dB/Oct slope
Measured Maximum SPL (Peak)
IEC noise@1m
125 dB SPL
Power Requirements
100 V – 240 V, 50/60 Hz or 29.6 Vdc when using battery
Power Consumption
10 W (idle), 20 W (1/8 power)
Dimensions (W × H × D)
300 × 307.5 × 301 mm
Weight
12.0 kg (main unit only)
Speaker unit Type
Coaxial speaker + compression driver
LF
8" cone, 2.0" voice coil
HF
1" throat compression driver, 1.4" voice coil
Speaker Magnet
Ferrite (LF, HF)
Body Material, Color
ABS (black)
Floor Monitor Angle
30° or 60°
Grille
Matte Black Powder Coated Perforated Steel Grille
Handle
Top panel × 1
Mixing Channels
5
Analog Inputs
Mono Mic/Line × 3, Stereo Line × 1
Bluetooth Audio
A2DP (SBC, AAC), Ver 5.0, Class 1
Content Protection Method
SCMS-T
Transmission Frequencies
2,402 – 2,480 MHz
Maximum Wireless Output Power (EIRP)
15 dBm (32 mW)
Power Amplifier
Class-D
Power Rating
*1
Dynamic
180 W (LF: 150 W, HF: 30 W)
Continuous
100 W (LF: 90 W, HF: 10 W)
Cooling Method
Natural convection (no cooling fan)
AD/DA
24 bit 48 kHz Sampling
Model Number
BTR-STP200
Battery Type
Rechargeable lithium ion battery pack
Weight
530 g (39 lbs)
Dimensions
186 × 96 × 39 mm
Capacity
79.92 Wh (2700 mAh, 29.6 V)
Operating Time
Maximum 10 hours, 1/16 power continuous 8 hours
Charging Time
Approx. 4 hours
Operating Temperature
0 – 40°C
Charging Temperature
5 – 40°C