User Manual

STAGEPAS 200BTR STAGEPAS 200 Owner’s Manual
8
NOTICE
To avoid the possibility of malfunction/ damage to the product, damage
to data, or damage to other property, follow the notices below.
 Handling and maintenance
• Do not use the product in the vicinity of a TV, radio, or other electric
products. Otherwise, the product, TV, or radio may generate noise.
• Do not expose the product to excessive dust or vibration, or extreme
cold or heat, in order to prevent the possibility of panel disfiguration,
unstable operation, or damage to the internal components.
• Do not install in locations where temperature changes are severe.
Otherwise, condensation may form on the inside or the surface of the
product, causing it to break.
• If there is reason to believe that condensation might have occurred,
leave the product for several hours without turning on the power until
the condensation has completely dried out, in order to prevent
possible damage.
• This product is designed to be transported in the Yamaha CASE-STP
200 speaker carrying case. If you use other devices to carry this
product, it may become unstable, causing it to malfunction.
• Do not use sodium hypochlorite solution, ethanol, benzine, thinner,
detergent or a chemical rag to clean the surface of the product.
Otherwise, the surface may become discolored or deteriorate.
 Handling and maintenance for Battery
• This product is a lithium-ion battery. Charge this product before using
it. Even if you plan not to use this product for a long period of time,
recharge it every six months to maintain battery power. Otherwise, the
product may become unable to retain a charge.
• If you plan not to use this product for a long period of time, remove the
battery from the relevant device. Otherwise, the batteries may be
drained, or battery liquid may leak, possibly resulting in damage to
your device.
• Do not remove the batteries from its original packaging until required
for use.
• Keep the batteries clean and dry.
• Wipe the battery terminals with a clean dry cloth if they become dirty.
• Do not leave the batteries on prolonged charge when not in use.
• If you plan not to use this product for a long period of time, remove the
battery from the relevant device. Otherwise, the battery may be
drained, or battery liquid may leak, possibly resulting in damage to
your device.
• Do not install this product in a place subject to drastic changes in
ambient temperature. Otherwise, condensation may form inside and
on the surface of your device, resulting in damage to the device.
• If there is a reason to believe that condensation might have occurred
on or in the device, leave it for a while, and then turn on the power to
the device. Turning the power on while condensation is present may
cause damage to the device.
• Charge the battery under an ambient temperature in the range of 0°C
to 40°C.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Yamaha Corporation is
under license.
(1003-M06 plate rear en 01)
Information
 About functions/data bundled with the product
• Even when the [P] (Standby/On) switch is in standby status, electricity
is still flowing to the product at the minimum level. When you are not
using the product for a long time, make sure you unplug the power
cord from the wall AC outlet.
• XLR-type connectors are wired as follows (IEC60268 standard): pin 1:
ground, pin 2: hot (+), and pin 3: cold (-).
 About this manual
• The illustrations and screens as shown in this manual are for
instructional purposes only.
• The company names and product names in this manual are the
trademarks or registered trademarks of their respective companies.
• Software may be revised and updated without prior notice.
 About disposal
• This product contains recyclable components.
When disposing of this product, please contact the appropriate
local authorities.
WARNING
Do not dispose your old battery in the trash. Call 1-877-2-RECYCLE, to find
a retail collection site nearest you to recycle your battery. You can also
locate a collection site on the Rechargeable Battery Recycling
Corporation (RBRC) website at;
http://www.call2recycle.org/
When this product has reached the end of its life, please remove and
recycle the battery before you dispose of this product.
PLEASE NOTE: The above wording is only for; Nickel Cadmium (Ni-Cd),
Nickel Metal Hydride (Ni-MH), Lithium Ion (Li-ion) and Small Sealed Lead
(Pb) batteries.
 Notice regarding repair requests
• Before requesting a repair of the unit, make sure that the battery
operates properly. If the battery operates properly, remove the battery
from the unit, then request a repair.
• If the battery malfunctions, do not send the battery to your Yamaha
dealer. Instead, please purchase an optional battery (BTR-STP200). If
the warranty has not expired, consult your Yamaha dealer.
* Refer to the “Charging the battery” section on page 15 for information
on how to check the battery condition.
The model number, serial number, power requirements, etc., may be
found on or near the name plate, which is at the rear of the unit. You
should note this serial number in the space provided below and
retain this manual as a permanent record of your purchase to aid
identification in the event of theft.
Model No.
Serial No.
Yamaha cannot be held responsible for damage caused by improper
use or modifications to the product, or data that is lost or destroyed.
PA_en_12 3/3