User Guide

4 STAGEPAS 600BT/STAGEPAS 400BT Owner’s Manual
CAUTION
Always follow the basic precautions listed below to
avoid the possibility of physical injury to you or others,
or damage to the device or other property. These
precautions include, but are not limited to, the following:
Power supply/power cord
• When removing the electric plug from the device or an
outlet, always hold the plug itself and not the cord. Pulling
by the cord can damage it.
Location
• Do not place the device in an unstable position where it
might accidentally fall over and cause injuries.
• Do not block the vents. This mixer has ventilation holes at
the top and sides to prevent the internal temperature from
becoming too high. In particular, do not place the mixer on
its side or upside down. Inadequate ventilation can result
in overheating, possibly causing damage to the mixer, or
even fire.
• If you install the mixer apart from the speakers:
- Do not cover it with any cloth.
- Make sure the top surface faces up; do not install on its
sides or upside down.
- Do not use the device in a confined, poorly-ventilated
location.
Inadequate ventilation can result in overheating, possibly
causing damage to the device(s), or even fire. Make sure
that there is adequate space around the device: at least
30 cm above, 30 cm at the sides and 30 cm behind.
• If you lay the speaker flat on its side or like a stage
monitor, make sure to remove the mixer first.
• Do not use the speaker’s handles for suspended
installation. Doing so can result in damage or injury.
• Do not hold the bottom of the speaker when transporting
or moving it. In doing so, you may pinch your hands under
the speaker, and result in injury.
• Do not place the device in a location where it may come
into contact with corrosive gases or salt air. Doing so may
result in malfunction.
• Before moving the device, remove all connected cables.
Connections
• For the SPEAKERS jacks of the mixer, use only the
included MODEL 600S or MODEL 400S speakers and
speaker cables. Use of other types of speakers and
cables may result in damage, or even fire.
Maintenance
• Remove the power plug from the AC outlet when cleaning
the device.
Handling caution
• Do not insert your fingers or hands in any gaps or
openings on the vents or panel of the mixer, and the ports
of the speaker.
• Avoid inserting or dropping foreign objects (paper,
plastic, metal, etc.) into any gaps or openings on the vents
or panel of the mixer, and the ports of the speaker. If this
happens, immediately turn off the power of the mixer,
unplug the power cord from the AC outlet, and have the
device inspected by qualified Yamaha service personnel.
• Do not rest your weight on the device or place heavy
objects on it. Avoid applying excessive force to the
buttons, switches or connectors to prevent injuries.
• Do not operate the device if the sound is distorting.
Prolonged use in this condition could cause overheating
and result in fire.
• Avoid pulling the cables such as microphones to prevent
injuries or damage to the speakers and mixer by causing
them to fall.
Yamaha cannot be held responsible for damage caused
by improper use or modifications to the device.