Sampling Unit Owner's Manual

Chapter 2 Tutorial
66 Chapter 2 Tutorial
● Tips for recording
●
If the tempo is too fast for you to achieve accurate timing, use the dial to lower the
BPM setting and try recording at a slower tempo.
●
You can press the [MEASURE] button, use the dial to move to the desired mea-
sure location, and begin recording from there.
●
If you do not wish to listen the sound of other tracks while you record, you can
mute those tracks before you begin recording.
● Detailed adjustments of the recorded sample
The sequencer records the timing at which the CL1 track sample is played, its vol-
ume, and its duration (gate time). This data is collectively referred to as an “event,”
and can be edited in detail using the Event Edit group parameters Location and
Value. (→ EVENT EDIT / LOCATION & VALUE: p.246)
EXAMPLE:
If the CL1 sample was recorded by mistake at 003:2
1.
Press the [EVENT EDIT] button, and then press the top button for [LOCA-
TION & VALUE].
2.
A display indicating the track to be edited.
Press the CL1 track pad, and press the [OK] button.
COMPOSED LOOP 1 track of track bank 1
3.
The display will allow you to specify the type of event to be edited.
Rotate the dial to select “NOTE,” and press the [OK] button.
4.
The display will indicate the note event as follows.
Location
Measure Beat Clock