User Manual
7
[Explanation of Input/Output Section]
<On the Instrument>
●
Control Box Instrument Jack
This jack is used to receive power from
the Control Box and transmit the audio
signal from the instrument to the Control
Box. Use the supplied cable to connect
the instrument to the “Instrument Jack” on
the Control Box.
* A commercially available audio cable with
stereo mini plugs on both ends can also be
used. (Cables with resistors are not com-
patible.)
* The system will not operate properly if a
monaural cable is used.
* The system will not operate properly if the
cable is attached to anything other than the
Control Box.
<On the Control Box>
●
Instrument Jack
This jack supplies power to the SV150
instrument and receives the audio signal
from the SV150. Use the supplied cable to
connect the instrument to the “Instrument
Jack” on the Control Box.
●
PHONES Jack
For connecting the supplied inner ear-
phones. Any commercially available head-
phones or inner earphones can be used.
●
LINE OUT Jack
Connecting one end of a commercially
available audio cable with a stereo mini
plug (sold separately) here, sends the ste-
reo audio output of the SILENT Violin™,
complete with effects and functions, to an
external audio device such as an amp, etc.
The violin and the click tone are heard in
the center, while the effects, depending
upon the effect type, are heard in stereo.
The audio signal from the SD card is out-
put according to the original file recording.
●
SD Memory Card Slot
Inserting the supplied SD memory card
into the slot here allows playback the fol-
lowing music files. (Refer to page 14 for
more information.)
• Compatible Music Files
Extension File Type
.aac AAC file compression
.m4a MPEG4 file compression
.mp3 MPEG1 Audio-Layer-3 file
compression
.wav Windows standard
(no file compression)
.mid MIDI File
• Do not listen for extended periods of time at loud volume levels using the inner earphones or head-
phones. Doing so can result in damage to your hearing.
• If the sound is distorted, use the volume control on the instrument or on the Control Box and lower the
volume until the sound is no longer distorted.
• Connect or disconnect the cable between the SILENT Violin™ and the Control Box only after the Control
Box power is switched OFF.
• When connecting the SILENT Violin™'s Control Box to an external device, make sure that the power is
switched OFF on all devices, or that the volume on all devices is set to the minimum level. Loud volume
levels can damage your hearing, and damage equipment.
• Disconnecting the cable while the power is ON may result in damage to the equipment. The sudden
shock to your ears may be severe, so please use caution.
• When making connections to external devices, make sure that the proper plugs are used and securely
connected.
Caution
Never connect any devices (in-
cluding other SILENT Violins™
with different model numbers)
other than the SV150 SILENT
Violin™ that is included in the
bundled set.
Doing so may result in damage to
the other device.
02_SV150S_En_R3.indd 7 14/01/23 13:51