User Manual

9
• Do not carry the instrument by the knee supports. Always carry the instrument by the neck or body.
■
Attaching the Knee Support
The knee support lets the player hold the instrument with the knees.
Use the bolt on the knee support to attach the support to the threaded hole on the
lower end of the rear panel as shown in the illustration.
●
Caution! When attaching or removing the knee support
• Hold on to the instrument when attaching/removing the knee support.
• Before tightening the attachment bolt, place the bottom edge of the knee support’s
plate on the attachment guide plate. (See diagram 1)
• The attachment bolt should be tightened enough so that there is no looseness in the
direction shown by “A” in the diagram 2. However, the support is designed to have
some looseness shown by “B”, even when the bolt is tightened firmly.
• When attaching/removing the knee support, be careful that it does not fall off and hit
the instrument. Take special care when removing the support, as when the attach-
ment bolt is fully loosened, the knee support will rotate in the direction shown by “C”
(diagram 2) and easily drop off. To prevent this, hold on to the support.
[ Diagram 1 ]
Threaded hole
Attachment
guide plate
[ Diagram 2 ]
Knee support
Attachment bolt
B
A
C
WG80460_SVC50_Body_R5.indb 9 15/01/20 18:13