User Manual
Table Of Contents
- Information
- About Yamaha LAN Monitor
- Contents
- Terminology
- Steps to use the software
- Software operating requirements
- Notes
- Notes regarding device detection
- Notes regarding SWX2100/SWR2100P series PoE switch detection
- Notes regarding the power supply interruption function for the Yamaha PoE switch
- Notes regarding a slave with the stack function enabled
- Notes on printing and print preview of the “Whole map”
- Notes regarding detection of Dante-enabled devices
- Notes regarding when using macOS10.15.x or later
- Installing and uninstalling Yamaha LAN Monitor
- Starting and exiting Yamaha LAN Monitor
- Yamaha LAN Monitor screen structure
- Network settings on the computer
- Basic operation
- Menu bar
- Toolbar and display area
- Map screen
- List screen
- Configuring the device
- Update the firmware
- Import/Export the CONFIG
- Troubleshooting
Toolbar and display area
Yamaha LAN Monitor for Mac User Guide
22
[History] button / “History” area
The “History” area shows the history of various messages.
Click the [ ] button to delete the entire message history.
NOTE
For details on the types of messages displayed, refer to “Messages shown in both the Notification area and the History area”
(page 57).
[Whole map] button
Displays the whole map screen. This displays all of the devices connected to the network in a single view.
A print function allows you to print the whole map that is being displayed.
1 Button area
• [ ] button:
Refreshes the information in the network configuration display area. Click this button to refresh with the
latest information.
• [ ] button:
Displays the print preview screen. You can print the whole map.
2 Legend area
•“Date:”
Shows the date and time of when the whole map screen or the [Refresh view] button was operated.
•“Port number”, “VLAN ID”
Shows the port number of the higher device (slave) (“2” in the right figure), the
port number of the device connected to the higher device (slave) (“1” in the
right figure), and the VLAN ID that joins the ports connecting the devices. For
the VLAN mode of trunk or hybrid, the set VLAN IDs are listed vertically.
1
3
2