User Manual

“Device name or Device Label” If a device label has been set, the device label will be
displayed; otherwise, the device name will be displayed.
“Model name” The same contents as the “L2MS Agent List” tab will be
displayed.
“Firmware revision” The same contents as the “L2MS Agent List” tab will be
displayed.
❼ Check box
Used to select or deselect a device.
10.3. “Config Import/Export” tab
From this tab, you can import/export the CONFIG for devices being managed by LAN Monitor, and view
information about the CONFIG.
Only devices that support CONFIG import/export from LAN Monitor will be displayed in this screen.
When you select a device and then press the “CONFIG import” button or “CONFIG export” button, a
dialog box will appear that confirms the CONFIG import/export of all selected devices at once.
For details, refer to “Import CONFIG on multiple units at once” and “Export CONFIG on multiple units
at once”.
❶ “Select all”
Press the button to check the checkboxes of all the displayed devices, and all the devices will be
selected.
❷ “Deselect all”
Press the button to remove the check from the checkboxes of all devices displayed, leaving all
devices unselected.
❸ Number of items displayed and number of items selected
The number of devices displayed in the device list and the number currently selected will be
displayed.
❹ “CONFIG import” button
Displays a dialog box to confirm importing CONFIG files in bulk for the currently selected
devices.
10. List screen
44 | Yamaha LAN Monitor for Mac User Guide