User Manual
Table Of Contents
- Yamaha LAN Monitor for Mac
- Table of contents
- 1. Introduction
- 2. Installing and uninstalling Yamaha LAN Monitor
- 3. Starting and exiting Yamaha LAN Monitor
- 4. Yamaha LAN Monitor screen structure
- 5. Network settings on the computer
- 6. Basic operation
- 7. Menu bar
- 8. Toolbar and display area
- 9. Map screen
- 10. List screen
- 11. Configuring the device
- 12. Update the firmware
- 13. Import/Export the CONFIG
- 14. Resources
- 15. Troubleshooting
- Yamaha LAN Monitor for Mac
How to specify the
CONFIG to be imported
Descriptions
Specify the CONFIG file to
be imported to each agent
Selects individual CONFIG files to import.
Send one CONFIG file to all
specified agents
Sends a single CONFIG file to all selected agents.
Used to prepare multiple agents with the same settings.
This item cannot be selected when multiple models are selected.
Search the specified
directory and import the
CONFIG corresponding to
the MAC address of the
agent
Automatically detects/imports CONFIG files in the specified
directory.
A CONFIG with the file name corresponding to the MAC address of
the agent (<underscore-delimited MAC address>.conf) must be
prepared in the specified directory.
For example, the name of the CONFIG file for an agent whose MAC
address is AC:44:F2:12:34:56 should be
ac_44_f2_12_34_56.conf.
6. Press the “Browse” button according to how you want to specify the CONFIG file, and select the
CONFIG file or directory.
7. When you have finished selecting the CONFIG file or directory, press the “Execute” button.
8. Wait until the progress bar reaches 100%.
13. Import/Export the CONFIG
Yamaha LAN Monitor for Mac User Guide | 59