User Manual
Table Of Contents
- Yamaha LAN Monitor for Win
- Table of contents
- 1. Introduction
- 2. Installing and uninstalling Yamaha LAN Monitor
- 3. Starting and exiting Yamaha LAN Monitor
- 4. Yamaha LAN Monitor screen structure
- 5. Network settings on the computer
- 6. Basic operation
- 7. Menu bar
- 8. Toolbar and display area
- 9. Map screen
- 10. List screen
- 11. Configuring the device
- 12. Update the firmware
- 13. Import/Export the CONFIG
- 14. Resources
- 15. Troubleshooting
- Yamaha LAN Monitor for Win
❺ “CSV export” button
Exports the list of switches/wireless APs currently being displayed to a CSV file.
NOTE
Items that are hidden in the “View settings” will not be included in the
exported CSV file.
Also, when narrowing down the search results, devices that are not shown in
the search results are not included in the exported CSV file.
❻ “Search” box
Narrows down the currently displayed device by string.
Type the string you want to search in the text box and press Enter key or the Search button to
execute the search.
When a search is performed, only devices with information that matches the string entered in
the text box will be displayed in the device list.
The title line of the table turns blue while the search is in progress, and “Displaying search
results” is shown below the search box.
To cancel the search, empty the text box and press the Enter key or the Find button, or switch
to a different tab.
❼ Device list
The following information will be displayed for each device managed by LAN Monitor. Some items
may not be displayed depending on the device.
In addition, items that are hidden in “View settings” will not be displayed.
“Route” Displays routing information showing where the device is, respective to
the PC running LAN Monitor.
For example, the device labeled “PC” is directly connected to the LAN
Monitor, and the device labeled “PC-3” is connected to port 3 of the
switch connected to LAN Monitor.
The switch port numbers that support the stack function are displayed
in the format “<Stack ID>.<Port number>”.
“Device Type” Shows an icon that indicates the type of device.
“Device name” The device names of the Yamaha switch and Yamaha wireless LAN
access point will be displayed.
The device name is a character string set in the device itself.
“Device Label”
You can enter any text you like to identify the individual device.
The device label is the information stored in LAN Monitor, and the
edited information is not reflected in the device itself.
This information is the same as the label information used in the
“Connected Devices” view.
“Serial Number” Shows the serial number of the device.
“Model name” Shows the model name.
10. List screen
42 | Yamaha LAN Monitor for Win User Guide