User Manual
Table Of Contents
- Yamaha LAN Monitor for Win
- Table of contents
- 1. Introduction
- 2. Installing and uninstalling Yamaha LAN Monitor
- 3. Starting and exiting Yamaha LAN Monitor
- 4. Yamaha LAN Monitor screen structure
- 5. Network settings on the computer
- 6. Basic operation
- 7. Menu bar
- 8. Toolbar and display area
- 9. Map screen
- 10. List screen
- 11. Configuring the device
- 12. Update the firmware
- 13. Import/Export the CONFIG
- 14. Resources
- 15. Troubleshooting
- Yamaha LAN Monitor for Win
7.2.5. [VLAN registration]
Open the “VLAN registration” dialog box.
Register the VLAN to use with the Yamaha LAN Monitor.
The VLAN you register here will be used when configuring the tagged VLAN for the switch.
Also, as the registered VLAN information is saved in the label settings file, you can export the file
from the “Export Label Settings” in the Setup menu.
❶ List of registered VLAN
Displays the list of the VLAN registered with the Yamaha LAN Monitor.
“VLAN ID:1” is registered as the default VLAN and cannot be changed.
❷ “Register number” input area
Input the VLAN registration number here.
This number is used when configuring a tagged VLAN only on the SWX2200 series.
If you are not using the SWX2200 series, this number is only used as the ID number on the
Yamaha LAN Monitor, and has no relation to the switch’s VLAN settings.
From two to 255 single-byte characters can be used for this value.
You cannot set the same number twice.
❸ “VLAN ID” input area
Input the VLAN ID here.
From two to 4094 single-byte characters can be used for this value.
You cannot set the same VLAN ID twice.
❹ “VLAN name” input area
Input the VLAN name here.
The VLAN name you input here is only shown on the Yamaha LAN Monitor display, and is not
applied to the agent.
Up to 32 single-byte characters can be used for this value.
❺ [Add] button
Press this to add a VLAN.
Up to 32 VLANs can be registered.
7. Menu bar
22 | Yamaha LAN Monitor for Win User Guide