User Manual

4.8.2 Set time zone
[Syntax]
clock timezone zone
clock timezone offset
no clock timezone
[Parameter]
zone : UTC, JST
Name of the time zone shown when standard time is in effect
offset : -12:00, -11:00, ... , -1:00, +1:00, ... , +13:00
Enter the difference from UTC
[Initial value]
clock timezone UTC
[Input mode]
global configuration mode
[Description]
Sets the time zone.
If this command is executed with the "no" syntax, UTC is specified.
[Example]
Set the time zone to JST.
SWP2(config)#clock timezone JST
Set the time zone to UTC+9 hours.
SWP2(config)#clock timezone +9:00
4.8.3 Configuring daylight saving time (recurring)
[Syntax]
clock summer-time
name recurring week wday month time week wday month time [offset]
no clock summer-time
[Parameter]
name : Time zone name to be displayed when daylight saving time is in effect
Alphanumeric characters (up to 7 characters)
week : <1-4> or first, last
Specifies the week of the month
wday : Sun, Mon, Tue, ... , Sat
Day of the week
month : <1-12> or Jan, Feb, Mar, ... , Dec
Month or month name
time : hh:mm
Time
offset : <1-1440>
Time to add during daylight saving time. Specify in minutes. The default value is 60.
[Initial value]
None
[Input mode]
global configuration mode
Command Reference | Maintenance and operation functions | 47