User Manual
Table Of Contents
- Yamaha LAN Monitor for Win
- Table of contents
- 1. Introduction
- 2. Installing and uninstalling Yamaha LAN Monitor
- 3. Starting and exiting Yamaha LAN Monitor
- 4. Yamaha LAN Monitor screen structure
- 5. Network settings on the computer
- 6. Basic operation
- 7. Menu bar
- 8. Toolbar and display area
- 9. Map screen
- 10. List screen
- 11. Configuring the device
- 12. Update the firmware
- 13. Import/Export the CONFIG
- 14. Resources
- 15. Troubleshooting
-
Messages
[mac] label: The power supply was forced to stop on the Yamaha switch (Stack ID: m) due to a
thermal abnormality.
[mac] label: The power supply was forced to stop on the Yamaha switch (Stack ID: m) because the fan
stopped.
[mac] label: The PoE power supply has recovered from forced stoppage of the Yamaha switch (Stack
ID: m).
[mac] label: The power supply was forced to stop on the Yamaha switch (Stack ID: m) because of a
power supply abnormality.
[mac] label: The MAC temperature of the Yamaha switch (Stack ID: m) has exceeded the threshold.
[mac] label: The MAC temperature of the Yamaha switch (Stack ID: m) has returned to normal.
[mac] label: A MAC temperature error has occurred on the Yamaha switch (Stack ID: m).
[mac] label: A thermal sensor error has occurred on the Yamaha switch (Stack ID: m).
[mac] label: The stack port (m.n) of the Yamaha switch has linked down.
[mac] label: The stack port (m.n) of the Yamaha switch has linked up.
14.2.2. Dante-related notifications
The following messages appear if there is a change in a Dante-enabled device.
Messages
The word clock of <device name> has been unlocked.
The word clock of <device name> has been locked.
The link is down for the primary port of <device name>. Dante is only working for the secondary port.
The link is down for the secondary port of <device name>. Dante is only working for the primary port.
The link is up for the primary port of <device name>.
The link is up for the secondary port of <device name>.
The Dante module of <device name> is operating in safe mode.
14.2.3. Messages generated by the snapshot function
The following messages appear when the snapshot function detects a network error, or when snapshot
creation is started. mac indicates the MAC address of the device that is the subject of the message,
label indicates the label identifying the device (does not appear when left blank), n indicates the port
number. Messages are not shown for devices that are not the subject of monitoring by the snapshot
function.
Messages
[mac] label: Device status matches the snapshot.
[mac] label: An unregistered device [mac] label is connected.
[mac] label: [mac] label is not connected to port n.
[mac] label: There is a device with an incorrect connection port. Connect [mac] label to port n.
Create a snapshot.
Started creating a snapshot.
14. Resources
72 | Yamaha LAN Monitor for Win User Guide