User Manual
Table Of Contents
- Yamaha LAN Monitor for Win
- Table of contents
- 1. Introduction
- 2. Installing and uninstalling Yamaha LAN Monitor
- 3. Starting and exiting Yamaha LAN Monitor
- 4. Yamaha LAN Monitor screen structure
- 5. Network settings on the computer
- 6. Basic operation
- 7. Menu bar
- 8. Toolbar and display area
- 9. Map screen
- 10. List screen
- 11. Configuring the device
- 12. Update the firmware
- 13. Import/Export the CONFIG
- 14. Resources
- 15. Troubleshooting
-
Yamaha LAN Monitor uses the same network adapter as the one selected in Dante
Controller to detect Dante-enabled devices. Therefore, in the environment where
Dante Controller is installed, select the network adapter in Dante Controller
appropriately and then start Yamaha LAN Monitor. When selecting a network adapter
with Dante Controller, it is necessary to check “Use Shared Dante Interface”. If you
change the network adapter selection in Yamaha LAN Monitor, the network adapter
selection status of other applications (such as Dante Controller) that use the Dante
shared interface will also be changed.
2. Installing and uninstalling Yamaha LAN Monitor
Yamaha LAN Monitor for Win User Guide | 9