User Manual

Menu bar
Yamaha LAN Monitor for Mac User Guide
14
[Setup] menu
 [Import Label Settings]
Opens the “Import Label Settings” dialog box.
Loads device labels displayed in the “Connected Devices” view from a file.
 [Export Label Settings]
Opens the “Export Label Settings” dialog box.
Saves device labels specified in the “Connected Devices” view as a file. The saved file has a filename extension
of “.nml.”
 [Basic Settings]
Opens the “Basic Settings” dialog box.
Displays a dialog box in which you can make basic settings for Yamaha LAN Monitor.
1 Slave monitoring time interval
Set the slave monitoring time interval in seconds.
Setting range: 2 – 10 sec
Default: 3 sec
This will detect the slave and update the Map screen every time the set amount of seconds elapses.
2 Monitoring times until slave disappearance is detected
Set the monitoring times until slave disappearance is detected.
Setting range: 2 – 10 times
Default: 3 times
If the search packets have been sent for the set number of times without receiving a response packet from
the slave, the corresponding slave is assumed lost.
5
❻
❽
❾ ❿
❼
1
3
2
4