User Manual
Table Of Contents
- Yamaha LAN Monitor for Win
- Table of contents
- 1. Introduction
- 2. Installing and uninstalling Yamaha LAN Monitor
- 3. Starting and exiting Yamaha LAN Monitor
- 4. Yamaha LAN Monitor screen structure
- 5. Network settings on the computer
- 6. Basic operation
- 7. Menu bar
- 8. Toolbar and display area
- 9. Map screen
- 10. List screen
- 11. Configuring the device
- 12. Update the firmware
- 13. Import/Export the CONFIG
- 14. Resources
- 15. Troubleshooting
- Yamaha LAN Monitor for Win
3. Check the checkboxes of the devices for which you want to update the firmware.
4. Press the “Firmware Update” button.
5. Click the “Browse” button to select the firmware file for each model.
6. After selecting the file, check the firmware revision of the file.
7. Select whether to perform a revision check after the file is sent, then press the “Execute”
button.
NOTE
If this checkbox is enabled, the system verifies whether the firmware is
properly applied to all devices to which the firmware file has been sent.
12. Update the firmware
56 | Yamaha LAN Monitor for Win User Guide