User Manual
Table Of Contents
- Yamaha LAN Monitor for Win
- Table of contents
- 1. Introduction
- 2. Installing and uninstalling Yamaha LAN Monitor
- 3. Starting and exiting Yamaha LAN Monitor
- 4. Yamaha LAN Monitor screen structure
- 5. Network settings on the computer
- 6. Basic operation
- 7. Menu bar
- 8. Toolbar and display area
- 9. Map screen
- 10. List screen
- 11. Configuring the device
- 12. Update the firmware
- 13. Import/Export the CONFIG
- 14. Resources
- 15. Troubleshooting
- Yamaha LAN Monitor for Win
8. Wait until the progress bar reaches 100%.
NOTE
The progress bar will be at 50% when the firmware file transfer is complete,
and at 100% when the updated firmware revision has been verified.
9. Check the execution results and output the results to a file if necessary.
NOTE
◦ For the execution result of the firmware update, please refer to
“Execution result of firmware/CONFIG bulk operation”.
◦ The execution result file is also automatically saved to the following
location.
%APPDATA%\Yamaha\LANMonitor\result
12. Update the firmware
Yamaha LAN Monitor for Win User Guide | 57