User Manual
Table Of Contents
- Yamaha LAN Monitor for Mac
- Table of contents
- 1. Introduction
- 2. Installing and uninstalling Yamaha LAN Monitor
- 3. Starting and exiting Yamaha LAN Monitor
- 4. Yamaha LAN Monitor screen structure
- 5. Network settings on the computer
- 6. Basic operation
- 7. Menu bar
- 8. Toolbar and display area
- 9. Map screen
- 10. List screen
- 11. Configuring the device
- 12. Update the firmware
- 13. Import/Export the CONFIG
- 14. Resources
- 15. Troubleshooting
-
❼ Device list
Displays a list of devices that support CONFIG import/export by LAN Monitor.
The items that will be displayed are as follows.
Check box Used to select or deselect a device.
“Route” The same contents as the “L2MS Agent List” tab will be
displayed.
“Device Type” The same contents as the “L2MS Agent List” tab will be
displayed.
“Device name or Device Label” If a device label has been set, the device label will be
displayed; otherwise, the device name will be displayed.
“Model name” The same contents as the “L2MS Agent List” tab will be
displayed.
“Date and time of last CONFIG
import”
The same contents as the “L2MS Agent List” tab will be
displayed.
“CONFIG file of last import” The same contents as the “L2MS Agent List” tab will be
displayed.
❽ Check box
Used to select or deselect a device.
10. List screen
Yamaha LAN Monitor for Mac User Guide | 45