User Manual

Network Policy
MED Capabilities Dev Type : End Point Class-3
MED Application Type : Reserved
MED Vlan id : 0
MED Tag/Untag : Untagged
MED L2 Priority : 0
MED DSCP Val : 0
MED Location Data Format : ECS ELIN
Latitude Res : 0
Latitude : 0
Longitude Res : 0
Longitude : 0
AT : 0
Altitude Res : 0
Altitude : 0
Datum : 0
LCI length : 0
What : 0
Country Code : 0
CA type : 0
MED Inventory
SWP2#
4.19.21 Clear LLDP frame counters
[Syntax]
clear lldp counters
[Input mode]
priviledged EXEC mode
[Description]
Clear the LLDP frame counter of all ports.
[Example]
Clear the LLDP frame counter.
SWP2>clear lldp counters
4.20 L2MS (Layer 2 management service) settings
4.20.1 Set L2MS control frame transmit/receive
[Syntax]
l2ms filter enable
l2ms filter disable
no l2ms filter
[Keyword]
enable : L2MS control frames cannot be transmitted or received
disable : L2MS control frames can be transmitted or received
[Initial value]
l2ms filter disable
[Input mode]
interface mode
[Description]
Prevents L2MS control frames from being transmitted or received.
If this command is executed with the "no" syntax, L2MS control frames can be transmitted and received.
[Note]
This command cannot be specified for the following interfaces.
•
VLAN interface
•
A physical interface inside a logical interface
100 | Command Reference | Maintenance and operation functions