User Manual

Unicast packets : 0
TX errors : 0
Collisions : 0
Drop packets : 0
Received and Transmitted:
64octet packets : 1
65-127octet packets : 166
128-255octet packets : 7
256-511octet packets : 1
512-1023octet packets : 0
1024-MAXoctet packets : 0
5.1.14 Clear frame counters
[Syntax]
clear counters ifname
[Parameter]
ifname : Interface name of LAN/SFP+ port or logical interface
Applicable interface
[Input mode]
priviledged EXEC mode
[Description]
Clears frame counter information for the interface specified by ifname.
If logical interface is specified as the ifname, the frame counters of all LAN/SFP+ port port units associated with that interface
are cleared.
[Example]
Clear the frame counters of LAN port #1.
SWP2#clear counters port1.1
5.1.15 Show SFP+ module status
[Syntax]
show ddm status
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
[Description]
Shows the status of the SFP+ module.
For each item, shows the current value, upper threshold value, and lower threshold value for each SFP+ port.
Item Description
Temperature Internal temperature of the module (°C)
Voltage Voltage value (V)
Current Current value (mA)
TX-Power Strength of light produced (dBm)
RX-Power Strength of light received (dBm)
[Example]
Show the status of the SFP+ module.
SWP2#show ddm status
Temperature High Alarm High Warning Low Warning Low Alarm
Interface (Celsius) Threshold Threshold Threshold Threshold
------------ ------------ ------------ ------------ ------------ ------------
port1.11 42.7 100.0 85.0 -40.0 -55.0
port1.12 40.7 95.0 90.0 -20.0 -25.0
Voltage High Alarm High Warning Low Warning Low Alarm
120 | Command Reference | Interface control