User Manual

Setting position
VLAN preset type
#2 #3
Down (ON) Up (OFF)
A
Up (OFF) Down (ON) B
Down (ON) Down (ON) C
The common setting values and presets are shown first, and then the specific to the presets setting values are shown.
• Settings common to all presets (system-wide)
Category Setting item Default value
Terminal settings
Console timeout 600 sec
Number of VTYs 8
Number of lines displayed 24
Password
Login password of no user none
Administrator password none
Password encryption not encrypted
Time management
Time zone UTC (±0)
NTP server none
NTP update cycle once per hour
RMON Behavior enabled
Firmware update
Download URL
firmware-update url http://
www.rtpro.yamaha.co.jp/firmware/
revision-up/swp2.bin
Allow revision-down don't allow
Timeout 300 sec
LLDP
Behavior disabled
Automatically set function disabled
L2MS
Behavior enabled (can not change)
Role slave (can not change)
SYSLOG
Debug level log output OFF
Information level log output ON
Error level log output ON
SYSLOG server none
Access control
Telnet server status run
Telnet server access allow only VLAN #1
SSH server status do not run
TFTP server status do not run
HTTP server status run
HTTP server access allow only VLAN #1
Secure HTTP server status do not run
Maintenance VLAN VLAN interface VLAN #1
L2 switching
Automatic MAC address learning enabled
Automatic MAC address learning
aging time
300 sec
24 | Command Reference | Configuration