User Manual

[Parameter]
switch : Allow login by special password
Setting value Description
enable Allow
disable Don't allow
[Initial value]
force-password enable
[Input mode]
global configuration mode
[Description]
Enable login with special password.
If this is enabled, only when logging in from a serial console, it is possible to log in using "w,lXlma" (lowercase W, comma,
lowercase L, uppercase X, and lowercase L, M, and A) instead of the specified user password.
If you login with the special password, you will be in priviledged EXEC mode.
If this command is executed with the "no" syntax, login with the special password is disabled.
[Example]
Enable login with special password.
SWP2(config)#force-password enable
Disable login with special password.
SWP2(config)#no force-password
4.2 User account maintenance
4.2.1 Set user password
[Syntax]
username username [privilege privilege] [password password]
no username username
[Keyword]
privilege : Specifies the user's privileges
password : Specifies the user's password
[Parameter]
username : User name
Single-byte alphanumeric characters (32 characters or less)
privilege : Whether to grant privilege
Setting value Description
on
Password input is not requested when moving to
privileged EXEC mode
Access to Web GUI is allowed with
administrator privileges
off
Password input is requested when moving to
privileged EXEC mode
Access to Web GUI is allowed with guest
password : User's login password
Command Reference | Maintenance and operation functions | 31